Spraying Car Builders adhesive onto carpet over sound deadener
Spraying Car Builders adhesive onto carpet over sound deadener
Spraying adhesive onto a van wall lined with deadener
Spraying adhesive onto a van wall lined with deadener
Carpet bonded over a van wheel arch
Carpet bonded over a van wheel arch
Click to open expanded view

Car Builders Upholstery Spray Adhesive, High Temp 120°C

SKU: SA
Price
$32.99
Inc. GST. Most orders ship Australia wide for a flat $15.95. Larger or heavier items may cost more.
Buy now, pay later
  • image
  • image
  • image

Not on our shelf right now. We order this one in from our supplier.
Shipping information

Australia wide flat rate shipping is $15.95. Larger or heavier items may cost more; we will confirm when your order is processed. In stock items are dispatched within 1 to 2 business days. Report transit damage within 24 hours with photos so we can lodge a freight claim.

Share this product

Share Post Pin E-mail
Spraying Car Builders adhesive onto carpet over sound deadener

Car Builders Upholstery Spray Adhesive, High Temp 120°C

$32.99

Product features

Quick answer: Peel and stick backing and old glue let go in the heat, so roof linings sag and carpet lifts. This Australian made contact adhesive is tested to 120°C and sprays a thick pattern for upholstery work. It sprays a thick splatter pattern for roof linings, carpet and extra hold on peel and stick insulation. Allow 3.5 square metres per can, because both surfaces need coating.

What problems does the Car Builders Upholstery Spray Adhesive fix?

  • Roof linings and insulation sagging in the heat. It is tested to 120°C, where general glues let go.
  • Peel and stick foam falling off upside down. Car Builders recommend it for added strength on self adhesive products in inverted positions.

How it works

Spray both surfaces, let it tack off, then press them together. The adjustable nozzle lays a thick splatter coat to cover large areas.

What is in the box

  • 1 can

How much do I need?

Each can covers 7 square metres of single surface, so allow 3.5 square metres of finished bond per can.

Will it fit my vehicle?

Plastics, metal, wood, glass, fabric, flexible foam and paper. Not plasticised vinyl or polystyrene.

How to install

Difficulty: Easy.

  1. Apply between 16°C and 27°C.
  2. Spray from 10 to 20cm at 90 degrees to the surface for 80 to 100% coverage.
  3. Spray both surfaces, one vertically and one horizontally.
  4. Wait until no glue transfers to your knuckle.
  5. Press together firmly, ideally with a roller.
  6. Allow 24 hours to fully cure.

Mistakes to avoid

  • Coating only one surface.
  • Bonding before it has tacked off.
  • Using it on plasticised vinyl or polystyrene, or in direct sun.

Specifications

Coverage 7 square metres per can (3.5 square metres bonded)
Application temperature 16°C to 27°C
Full cure 24 hours
Bonding Tested up to 120°C

FAQ

How much does one can cover?

7 square metres of spray, so 3.5 square metres of bonded area, because both sides need coating.

What takes spray adhesive off where it should not be?

Mineral turpentine or eucalyptus.

Is there a cure time before I load the trim?

Yes. Allow 24 hours for the adhesive to fully cure.

Which materials will it not bond?

Not on plasticised vinyl or polystyrene. Car Builders say it is not suitable for those.

Warranty: Your rights under the Australian Consumer Law apply. Contact our team for warranty help.

Also for your build: 4 way stretch carpet, Stage 2 acoustic liner, 12mm mass noise liner