Product features
Victron Energy 50A Buck Boost DC/DC Power Converter: The Buck Boost Converter From Victron Energy Have Been Designed to Be a True World-wide Product
DC-DC Converter for charging a 12V or 24V service battery in vehicles with a smart alternator (regenerative braking, Euro 5 and Euro 6 engines) The Buck-Boost DC-DC Converter is a DC-DC Converter for charging a 12V or 24V service battery in vehicles with a smart alternator. The converter will charge the auxiliary battery with a pre-set charge voltage, eliminating high voltages (e.g. Mercedes: 15,4V) and low voltages.
‘Engine running’ detection system Deep discharge of the vehicle's starting battery is avoided by a built-in ‘engine running’ detection system. Instead of this detection system, the converter can also be activated by means of a programmable input (D+, CAN bus or (+)15 connection).
Fully programmable The converter can be fully programmed by means of a simple and user-friendly PC application. (USB type A male to USB type B male cable needed)
One product for 12V, 24V and 12/24V systems The converter can be programmed to charge a 12 V or a 24 V auxiliary battery from either a 12V or a 24V alternator and starter battery.
Charge current and input current limiter The output current is determined by the following factors: - The maximum charge current setting. - The maximum input current setting. - The maximum operating temperature limit of the converter.
Input status indication (LED) Green: converter on. Yellow: input voltage below threshold, converter off. Red: over temperature, converter off. Blue, quick flash: engine running, converter will start after preset delay. Blue, slow flash: the converter is OFF and activation is blocked due to low input voltage.
Output status indication (LED) Green: converter off, battery voltage normal. Yellow: converter off, battery voltage low. Red: converter off, battery discharged or not connected. Purple: converter on.
Victron Energy ORI303050000 Specifications:
- Input voltage range: 10-30V
- Under voltage threshold: 10V
- Output voltage range: 10-30V
- Maximum charge current: 12V : 50A, 24V : 25A
- Converter off, LEDs off (power save mode): 7 mA
- ‘On’ threshold voltage: > 2V
- Maximum input voltage: 30V
- Output voltage if activated: Vpinout = Vin
- Maximum current (per pin): Ipinout = 1A
- Operating temperature range: -25 +60°C
- Ambient temperature: Max current: up to 60°C
- Dimensions : 213 x 120 x 30mm
