Roll of yellow 24mm masking tape
Roll of yellow 24mm masking tape
Click to open expanded view

Car Builders High Temperature Masking Tape, 24mm x 50m

SKU: MASK_TAPE
Price
$3.10
Inc. GST. Most orders ship Australia wide for a flat $15.95. Larger or heavier items may cost more.
Buy now, pay later
  • image
  • image
  • image

Not on our shelf right now. We order this one in from our supplier and it usually dispatches within 3 to 7 business days.
Shipping information

Australia wide flat rate shipping is $15.95. Larger or heavier items may cost more; we will confirm when your order is processed. In stock items are dispatched within 1 to 2 business days. Items we order in from a supplier usually dispatch within 3 to 7 business days. Report transit damage within 24 hours with photos so we can lodge a freight claim.

Share this product

Share Post Pin E-mail
Roll of yellow 24mm masking tape

Car Builders High Temperature Masking Tape, 24mm x 50m

$3.10

Product features

Quick answer: When paint bleeds under cheap tape the line is ruined, and tape that leaves glue behind means a messy clean up. It sticks instantly to metal, rubber, glass and plastic, resists paint bleed and gives sharp paint lines, even through high temperature baking. It removes cleanly in one piece with no residue. Each roll is 24mm wide and 50m long.

What problems does the Masking Tape 24mm fix?

  • Paint bleeding under the tape. It resists paint bleed for sharp lines.
  • Tape lifting on curves. It stays in place around corners, over contours and on irregular surfaces.
  • Sticky residue after baking. It removes cleanly in one piece with no adhesive residue.
  • Tape failing in the sun or wet. It suits waterproof jobs with high UV resistance and direct sunlight.

How it works

The tape sticks instantly and stays put around corners and over contours, so the edge stays sealed against paint. The tape holds through baking and IR curing, then peels off cleanly in one piece.

What is in the box

  • 1 x Masking Tape roll, 24mm wide x 50m long

How much do I need?

One roll is 50m long. Add up the edges you need to mask, and allow extra for double runs on wide areas.

Will it fit my vehicle?

It is not made for a vehicle model. Car Builders list automotive aftermarket and OEM painting, marine, aerospace, building, and painting and decorating.

How to install

Difficulty: Easy.

  1. Clean and dry the surface.
  2. Lay the tape along the paint line, pressing the edge down firmly.
  3. Run it around corners and contours, keeping light tension.
  4. Paint, then bake or IR cure as your paint system directs.
  5. Peel the tape back on itself at a low angle to remove it in one piece.

Mistakes to avoid

  • Not pressing the edge down, which lets paint creep under.
  • Laying tape over dust or wax.

Specifications

Width 24mm
Length 50m
Total thickness 145.0 micron
Temperature resistance 110/60 °C/min, as listed by Car Builders
Elongation at break 9%
Surfaces Metal, rubber, glass and plastic
Curing Approved for IR curing
Supplier code MASK_TAPE

FAQ

Will it leave residue?

No.

Can I bake or IR cure over it?

Yes. It suits repetitive baking processes and is approved for IR curing.

Does it work outdoors?

Yes.

What length and width is each roll of masking tape?

50m, at 24mm wide.

Warranty: Your rights under the Australian Consumer Law apply. Contact our team for warranty help.

Also for your build: masking film roll, masking kit, surface prep cleaner