The CANM8 CANNECT PARK interface is a multi-output CAN Bus interface designed to provide a universal solution for installing after-market parking sensors to vehicles that feature CAN Bus wiring. In addition to the front parking sensor control features, the interface also provides a speed pulse output and a 12v / 24v output when the reverse gear is selected.
Outputs
N.B. The speed output will turn off when the parking brake is applied to compatible vehicles.
Applications
The CANM8 CANNECT PARK is an ideal solution for use when installing after-market parking sensors. The interface provides 2 speed-dependent outputs, either of which can be utilised for controlling front parking sensors. A 12v / 24v output is generated by the interface as soon as speed is detected and switched off while the vehicle is above approximately 6 MPH. An alternative output provides power control from zero speed to 6 MPH.
The interface also provides a negative control output which can be used to power a front parking sensor system for forward motion only. This has the effect of disabling the front sensors while the vehicle is reversing so as not to create confusing tones from the front and rear sensors at the same time. This connection is optional and if the front parking sensors are preferred operational while the vehicle is reversing, the negative supply wire to the front parking sensor module should be connected to a permanent 0v point.
LED Status Details
Flashing Red: Searching for CAN information.
Solid Red: CAN Data was received but the vehicle has not yet been identified.
Solid Green: CAN Data received and vehicle type recognised.
Flashing Green: Vehicle speed detected.
Wiring Harness Details
N.B. The speed output will turn off when the parking brake is applied to compatible vehicles.
Specifications:
Vehicle Compatibility:
!