Stinger TCTOY2KIT Wireless Trailer Camera Kit, Toyota 24-pin

A Stinger wireless trailer camera kit for Toyota models with the 24-pin factory camera plug. It has an Echomaster PCAM-WLP camera, a PAC PACAVS-21 AV switch, the AXBUCH-T26V Toyota harness and mounting brackets. No video cable has to run through the van, float or trailer.

Stinger lists the Aurion XV40, Estima, Kluger XU40 and Tundra XK50. The TCTOY3KIT also uses a 24-pin plug but a different harness, the AXBUCH-T36V, for newer models, so make sure you pick the right one.

The factory reverse camera stays: the trailer camera takes over when the trailer is plugged in and hands back when it is removed. If there is no factory camera, it works with an aftermarket one. There are no parking lines, and some wiring is needed, so it is not fully plug and play.

Specifications

• Listed for: Toyota Aurion XV40, 2006 to 2011; Estima XR30, XR40, 2000 to 2005; Estima XR50, 2006 to 2016; Kluger XU40, 2007 to 2013; Tundra XK50, 2007 to 2013
• Car needs: 24-pin Toyota camera plug
• Camera: Echomaster PCAM-WLP, wireless
• Signal: 2.4 GHz, digital encrypted
• Range: up to 45 m, no obstacles
• View angle: 140 degrees
• Rating: IP67
• Low light: 0.1 lux
• Power: PWM, CAN bus safe
• Working temperature: minus 20°C to 65°C
• AV switch: PAC PACAVS-21
• Harness: AXBUCH-T26V
• Brackets: included
• Parking lines: no
• Factory reverse camera: kept
• Fitting: factory plug to bare wires, some wiring needed

FAQ

What is the Stinger Stinger TCTOY2KIT?

Stinger wireless trailer camera kit for Toyota Aurion, Estima, Kluger and Tundra with the 24-pin plug (T26V).

TCTOY2KIT or TCTOY3KIT?

Both use a 24-pin plug with different harnesses. The 2KIT suits the older models listed here. Check your model and year or ask us.