Stinger SGW9920 Pre-Cut Speedwire 9 Core Cable - 6 Metres

Stinger SGW9920 18 Gauge 9 Conductor Speedwire Cable Pre-Cut 6 Metre Single Pack with EIA Standard Colour Coding

The SGW9920 from Stinger is an 18 gauge 9 conductor Speedwire cable supplied as a pre-cut 6 metre single pack. Using EIA industry standard wire colours, it simplifies multi-channel amplifier installations and automotive electronics wiring by keeping all conductors in a single loom with familiar colour identification throughout.

Product overview

Running multiple individual wires through a vehicle for a 4-channel amplifier or automotive electronics installation adds time and creates a cluttered result. The SGW9920 addresses this by housing nine individually colour-coded conductors in a single cable, allowing all speaker, signal, or control runs to be routed together in one pass. The EIA industry standard colour coding matches the wire colours found on most aftermarket head units and audio devices, making connections straightforward without the need for additional colour identification.

Where the SGW991 is supplied as a 30 metre roll for trade and installer use, the SGW9920 is a pre-cut 6 metre single pack suited to single vehicle installations where a fixed length is preferred. The 6 metre length covers a standard full-vehicle run from the head unit location to the amplifier in most vehicle configurations.

Features and benefits

9 conductor single loom design: Houses nine individually colour-coded 18 gauge conductors in a single cable, allowing multiple speaker, signal, or control runs to be routed together in a single pass for a neater, faster installation.

EIA industry standard colour coding: Uses EIA standard wire colours that match the colour coding found on most aftermarket head units and audio devices, making conductor identification straightforward throughout the installation.

Pre-cut 6 metre single pack: Supplied as a pre-cut 6 metre length in a single pack, providing a convenient fixed-length solution for single vehicle installations without the need to cut from a bulk roll.

18 gauge conductors: The 18 gauge conductor size is suited to speaker signal and low-current control wiring applications in 4-channel amplifier and automotive electronics installations.

Broad application suitability: Suited to 4-channel amplifier speaker wiring, remote turn-on, signal, and automotive electronics applications including ECUs and engine sensors, making the SGW9920 a versatile multi-conductor wiring solution for single vehicle use.

Technical specs

Frequently asked questions

What is the difference between the SGW9920 and the SGW991?
Both are 18 gauge 9 conductor Speedwire cables with identical specifications and EIA standard colour coding. The SGW991 is a 30 metre roll suited to trade and installer use across multiple vehicles. The SGW9920 is a pre-cut 6 metre single pack suited to single vehicle installations where a fixed, convenient length is preferred over a bulk roll.

What is the SGW9920 Speedwire used for?
The SGW9920 is a 9 conductor 18 gauge cable suited to 4-channel amplifier installations where multiple speaker runs need to be routed together, as well as automotive electronics applications including ECUs, engine sensors, and other multi-conductor wiring requirements.

Is 6 metres enough for a full vehicle installation?
6 metres covers a standard run from the head unit location to the amplifier in most vehicle configurations. For larger vehicles or installations where the amplifier is mounted further from the head unit, the SGW991 30 metre roll may be more appropriate as it can be cut to a custom length. Contact us if you need guidance on the correct length for your specific vehicle.

Is the SGW9920 suitable for amplifier power and ground runs?
No. The SGW9920 uses 18 gauge conductors suited to speaker signal and low-current control wiring. It is not designed for amplifier power or ground runs, which require heavier gauge cable. Contact us if you need guidance on selecting the correct power cable for your installation.

What does EIA standard colour coding mean?
EIA stands for Electronic Industries Alliance. EIA standard colour coding is an industry-wide convention for wire identification used across aftermarket head units, amplifiers, and other audio and automotive electronics. Using EIA standard colours means the SGW9920 conductors match the colour coding already found on most aftermarket audio devices, making connections straightforward without additional labelling.