Stinger SGW991 30m Roll 18GA 9 Conductor Speed Wire

Stinger SGW991 18 Gauge 9 Conductor Speedwire Cable 30 Metre Roll with EIA Standard Colour Coding

The SGW991 from Stinger is an 18 gauge 9 conductor Speedwire cable supplied in a 30 metre roll. Using EIA industry standard wire colours, it simplifies multi-channel amplifier installations and automotive electronics wiring by keeping all conductors in a single loom with familiar colour identification throughout.

Product overview

Running multiple individual wires through a vehicle for a 4-channel amplifier or automotive electronics installation adds time and creates a cluttered result. The SGW991 addresses this by housing nine individually colour-coded conductors in a single cable, allowing all speaker, signal, or control runs to be routed together in one pass. The EIA industry standard colour coding matches the wire colours found on most aftermarket head units and audio devices, making connections straightforward without the need for additional colour identification.

The SGW991 is suited to 4-channel amplifier installations as well as broader automotive electronics applications including ECUs, engine sensors, and other multi-conductor wiring requirements. The 30 metre roll can be cut to the required length for each installation.

Features and benefits

9 conductor single loom design: Houses nine individually colour-coded 18 gauge conductors in a single cable, allowing multiple speaker, signal, or control runs to be routed together in a single pass for a neater, faster installation.

EIA industry standard colour coding: Uses EIA standard wire colours that match the colour coding found on most aftermarket head units and audio devices, making conductor identification straightforward throughout the installation.

18 gauge conductors: The 18 gauge conductor size is suited to speaker signal and low-current control wiring applications in 4-channel amplifier and automotive electronics installations.

Broad application suitability: Suited to 4-channel amplifier speaker wiring, remote turn-on, signal, and automotive electronics applications including ECUs and engine sensors, making the SGW991 a versatile multi-conductor wiring solution.

30 metre roll: Supplied in a 30 metre roll that can be cut to the required length for each installation, providing sufficient cable for a complete vehicle wiring run or multiple shorter applications.

Technical specs

Frequently asked questions

What is the SGW991 Speedwire used for?
The SGW991 is a 9 conductor 18 gauge cable suited to 4-channel amplifier installations where multiple speaker runs need to be routed together, as well as automotive electronics applications including ECUs, engine sensors, and other multi-conductor wiring requirements.

What does EIA standard colour coding mean?
EIA stands for Electronic Industries Alliance. EIA standard colour coding is an industry-wide convention for wire identification colours used across aftermarket head units, amplifiers, and other audio and automotive electronics. Using EIA standard colours means the SGW991 conductors match the colour coding already found on most aftermarket audio devices, making connections straightforward without the need for additional labelling.

Is the SGW991 suitable for amplifier power and ground runs?
No. The SGW991 uses 18 gauge conductors suited to speaker signal and low-current control wiring. It is not designed for amplifier power or ground runs, which require heavier gauge cable such as 4 gauge or 1/0 gauge. Contact us if you need guidance on selecting the correct power cable for your installation.

Can the 30 metre roll be cut to a custom length?
Yes. The SGW991 is supplied as a 30 metre roll that can be cut to the required length for each installation, making it suited to both full vehicle runs and shorter custom-length applications.

Is the SGW991 available in other conductor counts or gauges?
Contact us to confirm the full range of Stinger Speedwire multi-conductor cable options available to suit your specific installation requirements.