STEDI ST-04-G1-001 G1 Black Flood Work Light CREE XP-L2

Quick answer

The STEDI is the ST-04-G1-001 G1 Black Flood Work Light CREE XP-L2. The ST-04-G1-001 is STEDI's G1 Black Flood, the smallest light in the G Series.

A single 10W CREE XP-L2 LED gives 750 tested lumens, lighting an area 18m long and 21m wide at 1 lux, from a housing that weighs 0.29kg and draws 0.8A.

Jobs it suits

Factory reverse lights on most utes are close to useless on a dark campsite or a dirt track. A small flood on the rear bar or tray lights up the area behind you without the bulk of a bigger work light.

At 0.8A, two or three of these barely load the electrical system, which matters when you are running them off a camper battery or a machine with a small alternator.

Wash downs kill cheap lights. Dual IP68 and IP69K ratings cover immersion and high pressure hot water cleaning.

Specifications

In the box

• 1 x STEDI G1 Flood Light
• 1 x STEDI black cover
• Stainless steel hardware
• Stainless steel bracket
• 1 x 2 pin male connector

Fitting

The CISPR 25 Class 3 rating means it should not hiss through your UHF or AM radio, though cable routing still matters. Use a fused feed and a switch or relay, and if it is a reverse light, check the local rules on extra rear lamps before wiring it to come on automatically.

Warranty

This comes with the manufacturer's warranty through the Australian distributor. See the manufacturer's terms for details, plus our guarantees under the Australian Consumer Law.

FAQ about the STEDI

What is the STEDI?

It is the STEDI ST-04-G1-001 G1 Black Flood Work Light CREE XP-L2. The ST-04-G1-001 is STEDI's G1 Black Flood, the smallest light in the G Series.

What are the main features of the STEDI?

1 x STEDI G1 Flood Light. 1 x STEDI black cover. Stainless steel hardware.

What warranty comes with the STEDI?

This comes with the manufacturer's warranty through the Australian distributor. See the manufacturer's terms for details, plus our guarantees under the Australian Consumer Law.