Roadvision RGHB3EFLED LED HB3 Headlight Globe Kit 6000K 12-24V

Plug-and-Play LED Upgrade for HB3 Globe Fitments

Product Overview

The Roadvision RGHB3EFLED is a direct-fit LED upgrade designed to replace standard HB3 halogen globes without additional wiring or modules. Using the same connector and dimensions as the HB3 halogen globe it replaces, it installs straight into the factory harness no cutting, no adaptors, no rewiring required in most vehicles.

Each globe delivers 1,800 lumens at 13W with a 6000K white colour temperature and an OEM-matched beam pattern, producing more light on the road than a standard halogen bulb while reducing glare to oncoming traffic. Rated IP65 and operable from -40°C to +80°C (130°C max), it is built for demanding environments and suits both 12V and 24V vehicle systems. Note: this product is not ADR approved and is suitable for off-road use only. CANBUS modules may be required depending on vehicle confirm compatibility before purchasing.

Features & Benefits

• Plug-and-play installation — same connector as the HB3 halogen globe it replaces; no additional wiring required in most applications
• HB3 fitment — direct replacement for vehicles using HB3 (9005) halogen globes
• 1,800lm per globe — substantially more light than a standard halogen equivalent
• 13W power draw — efficient LED output with low current draw
• 6000K colour temperature — clean, bright white light for improved visibility
• OEM matched beam pattern — precise light output reduces glare to oncoming traffic
• IP65 rated — protected against dust ingress and low-pressure water jets
• -40°C to +80°C operating range — reliable across extreme temperature conditions
• 12V–24V compatible — suits passenger vehicles, 4WDs, and light commercial vehicles
• Off-road use only — not ADR approved for on-road use in Australia

Technical Specs

Compatible With

Suitable for vehicles using HB3 (9005) halogen globes in high beam headlight positions. Check your vehicle's owner manual or globe reference guide to confirm the correct fitment before purchasing.

Weight

Confirm with supplier.

Frequently Asked Questions

Is this globe kit legal for on-road use in Australia?

No. This product is not ADR (Australian Design Rules) approved and is suitable for off-road use only. It must not be used on public roads in Australia.

Do I need a CANBUS module to fit these globes?

It depends on your vehicle. Some modern vehicles with CANBUS electrical systems may generate error warnings or cause flickering when non-OEM globes are fitted. A CANBUS module may be required — confirm with your vehicle manufacturer or auto electrician before purchasing.

What vehicles use HB3 globes?

HB3 (also known as 9005) is a single-filament globe commonly used in high beam headlight positions across a range of passenger vehicles, SUVs, and 4WDs. Check your vehicle's owner manual or the reference on your existing globe to confirm the correct fitment.

What is the IP65 rating?

IP65 means the globe is fully protected against dust ingress and resistant to low-pressure water jets from any direction. This makes it suitable for off-road environments where the engine bay may be exposed to water, mud, and dust.

Are these a direct drop-in replacement with no wiring changes?

In most vehicles, yes — the globe uses the same connector as the HB3 halogen it replaces and installs directly into the factory harness. However, some vehicles may require a CANBUS module to prevent error codes or flickering. No cutting or rewiring of the factory harness is required.