Lamp face on lit, with red outer ring and amber indicator bands
Lamp face on lit, with red outer ring and amber indicator bands
Lamp face on unlit, showing the smoked lens and reflector
Lamp face on unlit, showing the smoked lens and reflector
Line drawing of the lamp front and side with 125 x 32mm dimensions
Line drawing of the lamp front and side with 125 x 32mm dimensions
Click to open expanded view

Roadvision BR125ARR LED Rear Combination Lamp, Stop, Tail, Indicator and Reflector

SKU: BR125ARR
Price
$87.50
Inc. GST. Most orders ship Australia wide for a flat $15.95. Larger or heavier items may cost more.
Buy now, pay later
  • image
  • image
  • image

Not on our shelf right now. We order this one in from our supplier.
Shipping information

Australia wide flat rate shipping is $15.95. Larger or heavier items may cost more; we will confirm when your order is processed. In stock items are dispatched within 1 to 2 business days. Report transit damage within 24 hours with photos so we can lodge a freight claim.

Share this product

Share Post Pin E-mail
Lamp face on lit, with red outer ring and amber indicator bands

Roadvision BR125ARR LED Rear Combination Lamp, Stop, Tail, Indicator and Reflector

$87.50

Product features

The Roadvision BR125ARR packs stop, tail, indicator and a retro reflector into one sealed LED lamp just 125mm long and 32mm high. It runs on anything from 10 to 30V DC and is ADR approved under CTA-061779, so it suits trailers, caravans, ute trays and light trucks where there is not much room for a lamp.

Where it earns its place

Narrow trailer guards, the back of a camper or a tray headboard often leave too little space for a full size rear combination lamp. At 125mm x 32mm on 45mm mounting centres, this one fits where bigger lamps will not.

Separate globes for each function mean more holders to corrode and more joins to fail. With 12 LEDs for stop and tail and 10 for the indicator, there is nothing to replace, and Roadvision rates the LEDs at 100,000 hours.

The current draw is tiny, 0.03A on tail and 0.19A on stop at 13.8V. That helps on long trailers with a lot of lamps on one circuit.

Specifications

Model BR125ARR
Functions Stop, tail, indicator, retro reflector
LEDs 12 stop and tail, 10 indicator
Voltage 10 to 30V DC
Current at 13.8V Stop 0.19A, tail 0.03A, indicator 0.25A
Lens Polycarbonate, mild tint
Housing Polycarbonate
Finish Gunmetal grey chrome
Mounting Surface mount, 45mm hole centres
Size 125mm x 32mm
Cable 300mm tinned copper
Sealing Fully sealed, waterproof
ADR approval CTA-061779
LED life 100,000 hours

Wire colours

  • White: earth
  • Red: stop
  • Brown: tail
  • Yellow: indicator

On an LED indicator, some older flasher cans flash fast because the load is so low. Fit an LED compatible flasher if that happens. The BR125ARW is the version with a reverse function built in.

Warranty

This comes with the manufacturer's warranty through the Australian distributor. See the manufacturer's terms for details, plus our guarantees under the Australian Consumer Law.

FAQ

Is it ADR approved?

Yes, under CTA-061779 for stop, tail, indicator and reflector.

Will it suit a 24V trailer?

Yes. Roadvision quotes a 10 to 30V DC input, so 12V and 24V rigs both work.

Does it have a reverse light?

No. The BR125ARW adds reverse.

How do I mount it?

Surface mount it on two studs or screws at 45mm centres on a flat panel, then join the leads by the wire colour table with sealed connectors.

Is it sold singly?

Roadvision does not give a pack quantity or list screws, so we will confirm what is supplied when you ask.