Redarc SBI212 Smart Start SBI 12V 200A

This is the heavier 12V Smart Start isolator, rated 200A continuous. Cut in is 13.2V, cut out is 12.7V.

The Redarc FK100 fuse kit is listed to suit it. Weight is 600 g. Overall it is 95 mm wide, 90 mm high and 100 mm long. Left idle it draws under 5mA. It is rated at 200A. The start battery is protected: the isolator only connects when charging voltage is present and lets go when it drops. It puts out 12V DC. It will take an inrush of 600A. Fusing called for: input fuse 200A and output fuse 200A.

Points Redarc makes about it: Overmould design. Power saving technology.

Fitting is best left to a qualified auto electrician or installer, which is what Redarc recommends. Questions about fit? Ask our team with your vehicle details.

The full Redarc range we carry is worth a look for matching parts.

Specifications

• Matching fuse kit: FK100
• Current rating: 200A
• Output: 12V DC
• Size: 95 mm wide, 90 mm high and 100 mm long
• Weight: 600 g
• Fusing: input fuse 200A and output fuse 200A
• Redarc part SBI212

Warranty

This comes with the manufacturer's warranty through the Australian distributor. See the manufacturer's terms for details, plus our guarantees under the Australian Consumer Law.

FAQ

How does the SBI212 Smart Start SBI 12V 200A protect my start battery?

A solenoid has almost no voltage drop, unlike a diode isolator, and it opens when voltage falls so accessories cannot drain the start battery.

Do I need the FK100 with this isolator?

Redarc lists the FK100 fuse kit for this isolator. Fuses are not included with it.

How much current is the Redarc Smart Start SBI 12V 200A rated for?

Redarc rates it at 200A.

What does the SBI212 Smart Start SBI 12V 200A supply on the output?

The output is 12V DC.

How big is the SBI212?

It measures 95 mm wide, 90 mm high and 100 mm long and weighs 600 g. Allow extra room for cables and airflow.