Redarc DPS2410 24V 10A In Vehicle DC Power Supply

DPS2410 is a 10A DC power supply giving a steady 24V DC output. Conversion efficiency is over 94%.

It is rated at 10A. Standby draw is under 5mA. Supply range on the input is 9 to 32V. It isolates accessories from voltage swings on the vehicle system. It weighs 680 g. It puts out 24V DC. Fusing called for: input fuse 40A and output fuse 40A. Size is 120 mm wide, 37 mm high and 150 mm long. It is built to run between minus 50°C and 50°C.

Points Redarc makes about it: More efficient with regulated output power. Improved functionality and reduced installation complexity. Fully encapsulated. Ignition controlled.

Redarc recommends fitting by a qualified auto electrician or installer. If you are not sure it suits your setup, give our workshop your vehicle details and we will check Redarc's listing with you.

You can compare it with the rest of our Redarc range.

Specifications

• Current rating: 10A
• Input voltage: 9 to 32V
• Output: 24V DC
• Size: 120 mm wide, 37 mm high and 150 mm long
• Weight: 680 g
• Fusing: input fuse 40A and output fuse 40A
• Redarc part DPS2410

Warranty

This comes with the manufacturer's warranty through the Australian distributor. See the manufacturer's terms for details, plus our guarantees under the Australian Consumer Law.

FAQ

What sort of gear needs a regulated supply?

It gives a steady output voltage while the vehicle voltage swings during cranking and charging, which suits radios, two way gear and electronics.

Is 10A the continuous figure on the DPS2410 24V 10A In Vehicle DC Power Supply?

Redarc rates it at 10A.

How low can the supply voltage drop before the DPS2410 24V 10A In Vehicle DC Power Supply stops?

The input range is 9 to 32V. Outside that it will not run as intended.

What does the DPS2410 24V 10A In Vehicle DC Power Supply supply on the output?

The output is 24V DC.

What is the operating temperature range of the Redarc DPS2410?

Redarc gives minus 50°C to 50°C. Mount it where it gets some airflow.