Redarc DPS1225 12V 25A In Vehicle DC Power Supply

DPS1225 is a 25A DC power supply giving a steady 12V DC output.

Fusing called for: input fuse 40A and output fuse 40A. Weight is 680 g. It measures 120 mm wide, 37 mm high and 150 mm long. Supply range on the input is 9 to 32V. Efficiency is quoted at over 94%. Standby draw is under 5mA. It is rated at 25A. Operating temperature is minus 50°C to 50°C. Output is 12V DC. It holds a steady output voltage when the vehicle voltage moves around, which suits radios and sensitive electronics.

From the Redarc product page: More efficient with regulated output power. Improved functionality and reduced installation complexity. Fully encapsulated.

Redarc's advice is to have a qualified auto electrician or installer fit it. Questions about fit? Ask our team with your vehicle details.

See our Redarc range for the parts it works with.

Specifications

• Current rating: 25A
• Input voltage: 9 to 32V
• Output: 12V DC
• Size: 120 mm wide, 37 mm high and 150 mm long
• Weight: 680 g
• Fusing: input fuse 40A and output fuse 40A
• Redarc part DPS1225

Warranty

This comes with the manufacturer's warranty through the Australian distributor. See the manufacturer's terms for details, plus our guarantees under the Australian Consumer Law.

FAQ

Why use a DC power supply like the Redarc 12V 25A In Vehicle DC Power Supply?

It gives a steady output voltage while the vehicle voltage swings during cranking and charging, which suits radios, two way gear and electronics.

What current can I run through the DPS1225 12V 25A In Vehicle DC Power Supply?

Redarc rates it at 25A.

What does the DPS1225 12V 25A In Vehicle DC Power Supply need on the input side?

The input range is 9 to 32V. Outside that it will not run as intended.

What voltage comes out of the Redarc 12V 25A In Vehicle DC Power Supply?

The output is 12V DC.

Will heat in the install spot be a problem?

Redarc gives minus 50°C to 50°C. Mount it where it gets some airflow.