Quad Lock® QLP-360-CRS 360 Concealed Small Base with Hidden Screws, 25mm Two Hole Pattern

The problem it fixes

A permanent phone mount on a boat dash, bike or work bench looks rough when the screw heads are on show. This base screws down on a 25mm pattern and the glamour cover hides the screws once the arm or head is fitted.

Why buy it

• Small footprint, two hole mounting
• Glamour cover hides the screws
• Tough glass filled nylon with stainless steel hardware
• 10mm spacer included for extra clearance
• Takes any Quad Lock 360 Arm or Head

Will it fit my setup?

• Flat surfaces only
• 25mm (15/16 inch) hole pitch
• M5 or 10 gauge pan head screws, not included
• No cable pass through. For that, choose QLP-360-CCS

MAG or Original? MAG cases and MAG adaptors also lock onto Original style mounts. Send us your phone model if you are unsure.

Fitting it

Mark and drill for two screws 25mm apart, screw the base down with M5 or 10 gauge pan head screws, then fit your 360 Arm or Head. The cover locks in over the screws.

What's in the box

• 1 x Quad Lock Concealed Small Base with cover
• 1 x Quad Lock 10mm Spacer
• 1 x M5 x 30 Countersunk hex socket screw (spacer to Lever Head or 360 Arm)
• 1 x M5 x 45 Countersunk hex socket screw (spacer to Weatherproof Wireless Charger)
• Mounting screws not included

What else you need

Two M5 or 10 gauge pan head screws to suit your surface, plus a Quad Lock 360 Arm and Head.

Specifications

Delivery

Order today. We ship Australia wide.

Warranty

1 year Quad Lock warranty against defects in materials and workmanship when bought from an authorised reseller like Frankies, on top of your Australian Consumer Law rights.

Questions we get asked

Are mounting screws included with the Quad Lock Concealed Base?

No. You need two M5 or 10 gauge pan head screws to suit the surface. The base comes with the cover, a 10mm spacer and two countersunk screws for the spacer.

What surface can I mount the Quad Lock Concealed Small Base on?

Flat surfaces only, with room for a two hole pattern at 25mm (15/16 inch) pitch.

How does the cover hide the screws on the Quad Lock Concealed Base?

Screw the base down, fit your 360 Arm or Head on top and the glamour cover is secured in place over the screw heads.

Can I run a charging cable through the QLP-360-CRS?

No. For a cable pass through, choose the QLP-360-CCS Concealed Through Cable base.

What is the 10mm spacer in the Quad Lock Concealed Base kit for?

It adds height for clearance. Use the M5 x 30 screw to join it to a Lever Head or 360 Arm, or the M5 x 45 screw for the Weatherproof Wireless Charger.