Projecta HDBT350 Heavy Duty Dual Battery Tray to suit Holden Colorado

Quick answer

The Projecta HDBT350 is the Heavy Duty Dual Battery Tray to suit Holden Colorado. Built for the Holden Colorado and Colorado 7, 2011 on, the HDBT350 mounts a second battery in the engine bay.

The range is made to bolt in for the listed vehicle without cutting or modifying the tray. A tray is one part of the job; budget for the charger or isolator, cable and fuses too.

Measure the battery you plan to use, including terminals, before ordering. Check the tray bolts at each service, as engine bay vibration loosens hardware over time. Fit the battery with a proper hold down, and check it again after the first rough trip. Route cables away from hot exhaust parts and sharp edges, and use grommets through panels. Engine bay heat and vibration are hard on connections, so check them at each service. Remove rings and watches before working on battery connections. Check that every bolt is tight and nothing can rub through insulation once the job is finished. Keep the battery top clean and dry; grime can let current track across between the posts. For related parts, see the <a href="https://frankiesautoelectrics.com.au/collections/battery-trays">battery trays</a> collection.

Specifications

• Vehicle: Holden Colorado and Colorado 7, 2011 on

Warranty

This comes with the manufacturer's warranty through the Australian distributor. See the manufacturer's terms for details, plus our guarantees under the Australian Consumer Law.

FAQ

Which vehicle does the HDBT350 tray fit?

Projecta lists the Holden Colorado and Colorado 7, 2011 on. To confirm your exact model, ask us with your vehicle details.

Do I need to cut or modify anything to fit the HDBT350?

Projecta says the range is designed to install without modifying the tray or the vehicle.

Is the HDBT350 a complete dual battery kit?

No, it is the tray. You will also need an auxiliary battery, an isolator or DC to DC charger, cable and fusing.