Projecta HDBT254 Heavy Duty Dual Battery Tray to suit Ford PX Ranger

Quick answer

The Projecta HDBT254 is the Heavy Duty Dual Battery Tray to suit Ford PX Ranger. Built for the Ford PX Ranger, the HDBT254 mounts a second battery in the engine bay.

A tray is one part of the job; budget for the charger or isolator, cable and fuses too.

The range is made to bolt in for the listed vehicle without cutting or modifying the tray.

Route cables away from hot exhaust parts and sharp edges, and use grommets through panels. Fit the battery with a proper hold down, and check it again after the first rough trip. Measure the battery you plan to use, including terminals, before ordering. Check the tray bolts at each service, as engine bay vibration loosens hardware over time. A loose or dirty connection can look like a flat battery or a failing alternator. If you are unsure about any of it, an auto electrician can fit and test the setup for you. Wear eye protection around batteries, as the acid and gases are hazardous. Keep the battery top clean and dry; grime can let current track across between the posts. Browse the full battery trays range, or the whole <a href="https://frankiesautoelectrics.com.au/collections/projecta">Projecta range</a>, for matching parts.

Specifications

• Vehicle: Ford PX Ranger

Warranty

This comes with the manufacturer's warranty through the Australian distributor. See the manufacturer's terms for details, plus our guarantees under the Australian Consumer Law.

FAQ

Will the HDBT254 suit my Ford PX Ranger?

Projecta lists the Ford PX Ranger. To confirm your exact model, ask us with your vehicle details.

Is the Ford PX Ranger tray a bolt in fit?

Projecta says the range is designed to install without modifying the tray or the vehicle.

What else do I need with the HDBT254 tray?

No, it is the tray. You will also need an auxiliary battery, an isolator or DC to DC charger, cable and fusing.