Projecta EVCBT2T2-3P 22kW Three Phase Type 2 EV Charging Cable

Quick answer

The 22kW three phase cable, Type 2 at the station and Type 2 at the car.

The 22kW three phase cable, Type 2 at the station and Type 2 at the car. Your car only charges at 22kW if its onboard charger accepts three phase. The single phase version is EVCBT2T2 at 7.2kW.

It is built to IK10 impact protection and IP65 when connected.

Charging speed also depends on the battery state of charge and temperature, so expect it to taper near full. Three phase supply is not available in every home, so confirm what your switchboard has before planning a three phase charger. Any fixed wiring for EV charging must be done by a licensed electrician. Inspect plugs and leads before each use and stop using anything with cracked housings or scorched pins. Keep connectors capped and off the ground when not in use, so dirt and water stay out of the pins. The car's onboard charger sets the maximum AC charge rate, whatever the cable or charger is rated for. Coil cables loosely and avoid driving over them; crushed insulation means the cable should be replaced. The full <a href="https://frankiesautoelectrics.com.au/collections/projecta">Projecta range</a> has the matching accessories.

Specifications

• Rating: 22kW, three phase
• Connectors: Type 2 to Type 2
• Protection: IP65 connected, IK10

Warranty

This comes with the manufacturer's warranty through the Australian distributor. See the manufacturer's terms for details, plus our guarantees under the Australian Consumer Law.

FAQ

Will the EVCBT2T2-3P charge my car at 22kW?

Only if the car's onboard charger accepts 22kW three phase; otherwise it charges at the car's limit.

How tough are the EVCBT2T2-3P connectors?

Projecta lists IK10 impact protection and IP65 when connected.

Is there a single phase version of the 22kW cable?

Yes, the EVCBT2T2 at 7.2kW.