Projecta EVCBT2T1 Type 2 to Type 1 EV Charging Cable

Quick answer

The Projecta EVCBT2T1 is the Type 2 to Type 1 EV Charging Cable. For charging an older Type 1 vehicle at a Type 2 charging station.

In the box: the charging cable, an EVA carry case and the instruction manual.

Projecta lists IP65 when connected and IK10 impact protection.

Type 2 owners want the EVCBT2T2 instead.

Inspect plugs and leads before each use and stop using anything with cracked housings or scorched pins. The car's onboard charger sets the maximum AC charge rate, whatever the cable or charger is rated for. Three phase supply is not available in every home, so confirm what your switchboard has before planning a three phase charger. Coil cables loosely and avoid driving over them; crushed insulation means the cable should be replaced. Charging speed also depends on the battery state of charge and temperature, so expect it to taper near full. Check which connector your car uses, Type 1 or Type 2, before ordering; it is usually shown in the owner's manual or on the charge port flap. Related parts are in the <a href="https://frankiesautoelectrics.com.au/collections/projecta">Projecta range</a>.

Specifications

• Connectors: Type 2 station to Type 1 vehicle
• Protection: IP65 connected, IK10
• In the box: cable, EVA carry case, manual

Warranty

This comes with the manufacturer's warranty through the Australian distributor. See the manufacturer's terms for details, plus our guarantees under the Australian Consumer Law.

FAQ

Will the EVCBT2T1 suit my Type 1 car at a public station?

Type 1 vehicles at Type 2 stations.

What comes with the EVCBT2T1?

The cable, an EVA carry case and the manual.

Is the EVCBT2T1 waterproof when plugged in?

IP65 when connected and IK10, per Projecta.