Projecta DBC150 12V 150 Amp Electronic Isolator

Quick answer

The Projecta DBC150 is the 12V 150 Amp Electronic Isolator. An advanced electronic isolator that suits fitment to larger 4WD vehicles, including Landcruisers, Patrols or similar, that will run powerful accessories such as fridges, lights and inverters.

Key figures Projecta publishes for the DBC150: voltage 12V, minimum operating voltage One battery above 7.5V, cut in voltage / cut out voltage 13.4V / 12.8V, current draw Charging 500mA, standby 30mA, control MCU, a microcontroller unit, charge current 125A Continuous, 150A Peak.

Engine bay heat and vibration are hard on connections, so check them at each service. Check that every bolt is tight and nothing can rub through insulation once the job is finished. Connect the clamps before switching on at the wall, and switch off before removing them. Remove rings and watches before working on battery connections. Disconnect the negative terminal first and reconnect it last whenever you work near the battery. Charge in a ventilated area, away from sparks or flames. Wear eye protection around batteries, as the acid and gases are hazardous.

See the rest of the <a href="https://frankiesautoelectrics.com.au/collections/projecta">Projecta range</a> for related parts.

Specifications

• Voltage: 12V
• Minimum operating voltage: One battery above 7.5V
• Cut in voltage / cut out voltage: 13.4V / 12.8V
• Current draw: Charging 500mA, standby 30mA
• Control: MCU, a microcontroller unit
• Charge current: 125A Continuous, 150A Peak

Warranty

This comes with the manufacturer's warranty through the Australian distributor. See the manufacturer's terms for details, plus our guarantees under the Australian Consumer Law.

FAQ

What job does this DBC150 12V 150 Amp Electronic Isolator do?

An advanced electronic isolator that suits fitment to larger 4WD vehicles, including Landcruisers, Patrols or similar, that will run powerful accessories such as fridges, lights and inverters.

What is the rated output of this DBC150 12V 150 Amp Electronic Isolator?

Projecta rates the charge current at 125A Continuous, 150A Peak.

What is the voltage of this DBC150 12V 150 Amp Electronic Isolator?

Projecta lists voltage 12V.

What is the minimum operating voltage of this DBC150 12V 150 Amp Electronic Isolator?

Projecta lists minimum operating voltage One battery above 7.5V.

What cut in voltage / cut out voltage does Projecta list for this DBC150 12V 150 Amp Electronic Isolator?

Projecta lists cut in voltage / cut out voltage 13.4V / 12.8V.