Projecta CL41-2 Cable Lug 70 mm² Cable, 10 mm Stud, Blister of 2

Quick answer

The CL41-2 lug suits 70 mm², 00 B and S cable and a 10 mm stud, blister of 2.

The CL41-2 lug suits 70 mm², 00 B and S cable and a 10 mm stud, blister of 2. A blister of two covers both ends of a single cable.

Barrel internal diameter is 11.2 mm. Tinned copper, a long barrel that takes a double crimp, and a flared entry so strands do not snag.

Crimp with a tool rated for the cable size and finish with heat shrink.

A tug test after crimping tells you straight away if the joint is sound. Use red and black heat shrink to mark polarity at each end. Match the lug to both the cable and the stud; a loose fit on either costs voltage. Strip only enough insulation for the barrel, so no bare copper shows past the joint. Keep lugs in a sealed tub so they stay bright until used. White or green crust on a terminal is corrosion, and it adds resistance to the circuit. Use cable rated for the current and length of the run, and fuse it close to the battery. Related parts are in the <a href="https://frankiesautoelectrics.com.au/collections/projecta">Projecta range</a>.

Specifications

• Cable: 70 mm², 00 B and S
• Stud hole: 10 mm
• Barrel internal diameter: 11.2 mm
• Pack: blister of 2
• Material: electro tinned copper

Warranty

This comes with the manufacturer's warranty through the Australian distributor. See the manufacturer's terms for details, plus our guarantees under the Australian Consumer Law.

FAQ

What stud does the CL41-2 lug fit?

It is made for a 10 mm stud.

Which cable gauge suits the CL41-2 barrel?

Projecta lists 70 mm², 00 B and S, with a barrel internal diameter of 11.2 mm.

How many lugs are in the CL41-2?

The name lists 2, sold as a blister of 2.

How should the CL41-2 be crimped?

Crimp it with a tool rated for the cable size; the long shank allows a double crimp. Heat shrink over the barrel finishes the job.