Projecta CL37-50 Cable Lug 50 mm² Cable, 8 mm Stud, Pack of 50

Quick answer

The Projecta CL37-50 is the Cable Lug 50 mm² Cable, 8 mm Stud, Pack of 50. A pack of 50 of tinned copper lugs for 50 mm², 0 B and S cable with an 8 mm stud hole.

At 50 per pack these suit a workshop or fleet stocking up.

A hammer crimp will work in a pinch, a hydraulic or ratchet crimper does it properly. The barrel bore is 9.5 mm, matched to the cable size.

Projecta makes them from electro tinned copper with a long shank for a double crimp, and a bell mouth that guides the strands in.

Strip only enough insulation for the barrel, so no bare copper shows past the joint. Keep lugs in a sealed tub so they stay bright until used. Match the lug to both the cable and the stud; a loose fit on either costs voltage. Use red and black heat shrink to mark polarity at each end. A tug test after crimping tells you straight away if the joint is sound. Disconnect the negative terminal first and reconnect it last whenever you work near the battery. See the rest of the <a href="https://frankiesautoelectrics.com.au/collections/projecta">Projecta range</a> for matching parts.

Specifications

• Cable: 50 mm², 0 B and S
• Stud hole: 8 mm
• Barrel internal diameter: 9.5 mm
• Pack: pack of 50
• Material: electro tinned copper

Warranty

This comes with the manufacturer's warranty through the Australian distributor. See the manufacturer's terms for details, plus our guarantees under the Australian Consumer Law.

FAQ

Before I order, what stud does the CL37-50 lug fit?

It is made for an 8 mm stud.

Fitting it myself, which cable gauge suits the CL37-50 barrel?

Projecta lists 50 mm², 0 B and S, with a barrel internal diameter of 9.5 mm.

Quick question: how many lugs are in the CL37-50?

The name lists 50, sold as a pack of 50.

Before I order, do I solder or crimp the CL37-50?

Crimp it with a tool rated for the cable size; the long shank allows a double crimp. Heat shrink over the barrel finishes the job.