Projecta CL37-2 Cable Lug 50 mm² Cable, 8 mm Stud, Blister of 2

Quick answer

The Projecta CL37-2 is the Cable Lug 50 mm² Cable, 8 mm Stud, Blister of 2. 50 mm² cable onto an 8 mm stud: that is the job for the CL37-2, sold as a blister of 2.

A blister of two covers both ends of a single cable.

Barrel internal diameter is 9.5 mm. Projecta makes them from electro tinned copper with a long shank for a double crimp, and a bell mouth that guides the strands in.

Crimp with a tool rated for the cable size and finish with heat shrink.

Use red and black heat shrink to mark polarity at each end. Keep lugs in a sealed tub so they stay bright until used. Strip only enough insulation for the barrel, so no bare copper shows past the joint. A tug test after crimping tells you straight away if the joint is sound. Match the lug to both the cable and the stud; a loose fit on either costs voltage. Check that every bolt is tight and nothing can rub through insulation once the job is finished. Related parts are in the <a href="https://frankiesautoelectrics.com.au/collections/projecta">Projecta range</a>.

Specifications

• Cable: 50 mm², 0 B and S
• Stud hole: 8 mm
• Barrel internal diameter: 9.5 mm
• Pack: blister of 2
• Material: electro tinned copper

Warranty

This comes with the manufacturer's warranty through the Australian distributor. See the manufacturer's terms for details, plus our guarantees under the Australian Consumer Law.

FAQ

Before I order, will the CL37-2 go over an 8 mm stud?

It is made for an 8 mm stud.

Before I order, which cable gauge suits the CL37-2 barrel?

Projecta lists 50 mm², 0 B and S, with a barrel internal diameter of 9.5 mm.

Before I order, is the CL37-2 a workshop pack or a pair?

The name lists 2, sold as a blister of 2.

Quick question: how should the CL37-2 be crimped?

Crimp it with a tool rated for the cable size; the long shank allows a double crimp. Heat shrink over the barrel finishes the job.