Projecta CL33-50 Cable Lug 35 mm² Cable, 8 mm Stud, Pack of 50

Quick answer

The Projecta CL33-50 is the Cable Lug 35 mm² Cable, 8 mm Stud, Pack of 50. 35 mm² cable onto an 8 mm stud: that is the job for the CL33-50, sold as a pack of 50.

Fifty in the pack makes it a workshop quantity for building starter and dual battery leads. Barrel internal diameter is 8.2 mm.

Tinned copper, a long barrel that takes a double crimp, and a flared entry so strands do not snag.

A hammer crimp will work in a pinch, a hydraulic or ratchet crimper does it properly.

Strip only enough insulation for the barrel, so no bare copper shows past the joint. Use red and black heat shrink to mark polarity at each end. A tug test after crimping tells you straight away if the joint is sound. Match the lug to both the cable and the stud; a loose fit on either costs voltage. Keep lugs in a sealed tub so they stay bright until used. Engine bay heat and vibration are hard on connections, so check them at each service. Related parts are in the <a href="https://frankiesautoelectrics.com.au/collections/projecta">Projecta range</a>.

Specifications

• Cable: 35 mm², 2 B and S
• Stud hole: 8 mm
• Barrel internal diameter: 8.2 mm
• Pack: pack of 50
• Material: electro tinned copper

Warranty

This comes with the manufacturer's warranty through the Australian distributor. See the manufacturer's terms for details, plus our guarantees under the Australian Consumer Law.

FAQ

Before I order, will the CL33-50 go over an 8 mm stud?

It is made for an 8 mm stud.

Fitting it myself, which cable gauge suits the CL33-50 barrel?

Projecta lists 35 mm², 2 B and S, with a barrel internal diameter of 8.2 mm.

Just checking, how many lugs are in the CL33-50?

The name lists 50, sold as a pack of 50.

Quick question: how should the CL33-50 be crimped?

Crimp it with a tool rated for the cable size; the long shank allows a double crimp. Heat shrink over the barrel finishes the job.