Projecta CL29-50 Cable Lug 25 mm² Cable, 8 mm Stud, Pack of 50

Quick answer

The CL29-50 lug suits 25 mm², 3 B and S cable and an 8 mm stud, pack of 50.

The CL29-50 lug suits 25 mm², 3 B and S cable and an 8 mm stud, pack of 50. Fifty in the pack makes it a workshop quantity for building starter and dual battery leads. Crimp with a tool rated for the cable size and finish with heat shrink.

Barrel internal diameter is 6.8 mm.

Projecta makes them from electro tinned copper with a long shank for a double crimp, and a bell mouth that guides the strands in.

A tug test after crimping tells you straight away if the joint is sound. Match the lug to both the cable and the stud; a loose fit on either costs voltage. Strip only enough insulation for the barrel, so no bare copper shows past the joint. Use red and black heat shrink to mark polarity at each end. Keep lugs in a sealed tub so they stay bright until used. Use cable rated for the current and length of the run, and fuse it close to the battery. The full <a href="https://frankiesautoelectrics.com.au/collections/projecta">Projecta range</a> has the matching accessories.

Specifications

• Cable: 25 mm², 3 B and S
• Stud hole: 8 mm
• Barrel internal diameter: 6.8 mm
• Pack: pack of 50
• Material: electro tinned copper

Warranty

This comes with the manufacturer's warranty through the Australian distributor. See the manufacturer's terms for details, plus our guarantees under the Australian Consumer Law.

FAQ

Which bolt size suits the hole in the CL29-50?

It is made for an 8 mm stud.

What cable size is the 8 mm CL29-50 lug for?

Projecta lists 25 mm², 3 B and S, with a barrel internal diameter of 6.8 mm.

Before I order, how many lugs are in the CL29-50?

The name lists 50, sold as a pack of 50.

Before I order, how should the CL29-50 be crimped?

Crimp it with a tool rated for the cable size; the long shank allows a double crimp. Heat shrink over the barrel finishes the job.