Projecta CL25-50 Cable Lug 15 mm² Cable, 8 mm Stud, Pack of 50

Quick answer

The CL25-50 lug suits 15 mm², 6 B and S cable and an 8 mm stud, pack of 50.

The CL25-50 lug suits 15 mm², 6 B and S cable and an 8 mm stud, pack of 50. At 50 per pack these suit a workshop or fleet stocking up. Use a proper hex or indent crimper sized for the cable, then heat shrink the barrel.

Barrel internal diameter is 5.4 mm.

Projecta makes them from electro tinned copper with a long shank for a double crimp, and a bell mouth that guides the strands in.

Keep lugs in a sealed tub so they stay bright until used. Strip only enough insulation for the barrel, so no bare copper shows past the joint. Use red and black heat shrink to mark polarity at each end. A tug test after crimping tells you straight away if the joint is sound. Match the lug to both the cable and the stud; a loose fit on either costs voltage. Use cable rated for the current and length of the run, and fuse it close to the battery. See the rest of the <a href="https://frankiesautoelectrics.com.au/collections/projecta">Projecta range</a> for matching parts.

Specifications

• Cable: 15 mm², 6 B and S
• Stud hole: 8 mm
• Barrel internal diameter: 5.4 mm
• Pack: pack of 50
• Material: electro tinned copper

Warranty

This comes with the manufacturer's warranty through the Australian distributor. See the manufacturer's terms for details, plus our guarantees under the Australian Consumer Law.

FAQ

Quick question: what stud does the CL25-50 lug fit?

It is made for an 8 mm stud.

Before I order, can I use the CL25-50 on 15 mm² battery cable?

Projecta lists 15 mm², 6 B and S, with a barrel internal diameter of 5.4 mm.

Before I order, is the CL25-50 a workshop pack or a pair?

The name lists 50, sold as a pack of 50.

Quick question: do I solder or crimp the CL25-50?

Crimp it with a tool rated for the cable size; the long shank allows a double crimp. Heat shrink over the barrel finishes the job.