Projecta BT811H-N10 Negative Heavy Duty Saddle Satin Brass Battery Terminal, Bag of 10

Quick answer

The Projecta BT811H-N10 is the Negative Heavy Duty Saddle Satin Brass Battery Terminal, Bag of 10. It is the heavy duty version, built for the bigger cable sizes used on 4WD, truck and dual battery work.

This is the 10 piece bag of negative heavy duty saddle terminals, handy for workshops restocking the drawer. It is the heavy duty version, built for the bigger cable sizes used on 4WD, truck and dual battery work. Marked negative, it is sized for the negative post; the two are not interchangeable.

Give the post a clean first; a dirty post will undo a good terminal. Size the cable first: this one is listed for 50 to 70 mm², 0 to 00 B and S.

A saddle clamp grips the stripped cable directly, no lug needed. Projecta polishes the forged brass then plates it in satin nickel, and supplies stainless steel hardware.

Measure the post and the cable before ordering; a terminal that is too big for the post will never clamp properly. Check the terminal again after the first week, as new cable can settle under the clamp. Tighten firmly but do not crush the post; a lead post deforms easily. Related parts are in the <a href="https://frankiesautoelectrics.com.au/collections/projecta">Projecta range</a>.

Specifications

• Post: negative
• Style: heavy duty saddle
• Pack: bag of 10
• Main cable: 50 to 70 mm², 0 to 00 B and S
• Material: satin nickel plated forged brass

Warranty

This comes with the manufacturer's warranty through the Australian distributor. See the manufacturer's terms for details, plus our guarantees under the Australian Consumer Law.

FAQ

Quick question: does the BT811H-N10 bag contain 10 of the same negative terminal?

All 10 are negative heavy duty saddle terminals, packed in one bag.

Quick question: will 50 to 70 mm² cable fit the BT811H-N10?

Projecta lists 50 to 70 mm², 0 to 00 B and S for the main cable.

From the workshop: why does the BT811H-N10 only suit the negative post?

No. Positive posts are slightly larger than negative ones, so this negative terminal is sized for the negative post only.

Is the BT811H-N10 plated, and are the bolts stainless?

It is forged brass polished and plated in satin nickel, and Projecta supplies stainless steel hardware with it.

One more thing: my old heavy duty saddle terminal is cracked; can I just swap in the BT811H-N10?

Cut the cable back to clean, bright copper if the old end is green or black, then fit the new terminal and tighten it firmly.