Projecta BT811-P10 Positive Saddle With Dual Auxiliary Satin Brass Battery Terminal, Bag of 10

Quick answer

The Projecta BT811-P10 is the Positive Saddle With Dual Auxiliary Satin Brass Battery Terminal, Bag of 10. Size the cable first: this one is listed for 20 to 35 mm², 4 to 2 B and S.

Bag of 10 positive saddle with dual auxiliary terminals, so this one is aimed at workshops restocking the drawer rather than a single car. Size the cable first: this one is listed for 20 to 35 mm², 4 to 2 B and S.

The dual auxiliary outlets suit 5 to 15 mm², 10 to 6 B and S wire, so accessory leads land on the terminal instead of being piled on the post bolt. Main cable goes under the saddle; the extra outlets take the smaller accessory wires. Finish is satin nickel over polished forged brass, with stainless steel hardware in the pack.

Marked positive, it is sized for the positive post; the two are not interchangeable. Before fitting, clean any corrosion off the post so the terminal seats properly.

Keep the positive covered so a spanner cannot bridge it to the body. After fitting, a thin smear of terminal grease or spray protector slows corrosion. Tighten firmly but do not crush the post; a lead post deforms easily. Related parts are in the <a href="https://frankiesautoelectrics.com.au/collections/projecta">Projecta range</a>.

Specifications

• Post: positive
• Style: saddle with dual auxiliary
• Pack: bag of 10
• Main cable: 20 to 35 mm², 4 to 2 B and S
• Auxiliary cable: 5 to 15 mm², 10 to 6 B and S
• Material: satin nickel plated forged brass

Warranty

This comes with the manufacturer's warranty through the Australian distributor. See the manufacturer's terms for details, plus our guarantees under the Australian Consumer Law.

FAQ

Doing this in the driveway, does the BT811-P10 bag contain 10 of the same positive terminal?

All 10 are positive saddle with dual auxiliary terminals, packed in one bag.

Fitting it myself, what main cable range is the BT811-P10 rated for?

Projecta lists 20 to 35 mm², 4 to 2 B and S for the main cable.

For a customer job, why does the BT811-P10 only suit the positive post?

No. Positive posts are slightly larger than negative ones, so this positive terminal is sized for the positive post only.

Doing this in the driveway, is the BT811-P10 plated, and are the bolts stainless?

It is forged brass polished and plated in satin nickel, and Projecta supplies stainless steel hardware with it.

Before I order, will the satin nickel plated forged brass BT811-P10 handle engine bay heat?

Projecta lists it as satin nickel plated forged brass, which conducts well and copes with engine bay heat and vibration.