Projecta BT811-P1 Positive Saddle With Dual Auxiliary Satin Brass Battery Terminal, Blister of 1

Quick answer

The Projecta BT811-P1 is the Positive Saddle With Dual Auxiliary Satin Brass Battery Terminal, Blister of 1. Need to replace just one clamp? The BT811-P1 is a single positive saddle with dual auxiliary terminal.

Need to replace just one clamp? The BT811-P1 is a single positive saddle with dual auxiliary terminal. It takes 50 to 70 mm², 0 to 00 B and S main cable.

Two auxiliary outlets take 5 to 15 mm², 10 to 6 B and S cable, handy for a fridge feed, isolator or charger lead without stacking lugs. The main cable clamps under the saddle while the auxiliary outlets handle lighter accessory wiring. Projecta polishes the forged brass then plates it in satin nickel, and supplies stainless steel hardware.

Marked positive, it is sized for the positive post; the two are not interchangeable. Give the post a clean first; a dirty post will undo a good terminal.

Measure the post and the cable before ordering; a terminal that is too big for the post will never clamp properly. After fitting, a thin smear of terminal grease or spray protector slows corrosion. Tighten firmly but do not crush the post; a lead post deforms easily. See the rest of the <a href="https://frankiesautoelectrics.com.au/collections/projecta">Projecta range</a> for matching parts.

Specifications

• Post: positive
• Style: saddle with dual auxiliary
• Pack: a single terminal
• Main cable: 50 to 70 mm², 0 to 00 B and S
• Auxiliary cable: 5 to 15 mm², 10 to 6 B and S
• Material: satin nickel plated forged brass

Warranty

This comes with the manufacturer's warranty through the Australian distributor. See the manufacturer's terms for details, plus our guarantees under the Australian Consumer Law.

FAQ

Can I run a fridge or charger feed from the BT811-P1 auxiliary outlets?

The auxiliary outlets take 5 to 15 mm², 10 to 6 B and S cable, so lighter accessory feeds connect at the terminal. Fuse each feed to suit the cable.

Is the BT811-P1 plated, and are the bolts stainless?

It is forged brass polished and plated in satin nickel, and Projecta supplies stainless steel hardware with it.

Is the saddle with dual auxiliary BT811-P1 suitable for a boat or caravan battery?

It suits any battery with the matching positive post, and cable in the 50 to 70 mm², 0 to 00 B and S range. Check the post type and cable size before ordering.