Projecta BT620H-P10 Positive Heavy Duty Saddle With Dual Auxiliary Brass Battery Terminal, Bag of 10

Quick answer

The Projecta BT620H-P10 is the Positive Heavy Duty Saddle With Dual Auxiliary Brass Battery Terminal, Bag of 10. It is the heavy duty version, built for the bigger cable sizes used on 4WD, truck and dual battery work.

This is the 10 piece bag of positive heavy duty saddle with dual auxiliary terminals, handy for workshops restocking the drawer. It is the heavy duty version, built for the bigger cable sizes used on 4WD, truck and dual battery work.

Main cable goes under the saddle; the extra outlets take the smaller accessory wires. Material is forged brass, a solid choice for battery connections. Check polarity before fitting: this suits the positive post only.

Give the post a clean first; a dirty post will undo a good terminal. Size the cable first: this one is listed for 50 to 70 mm², 0 to 00 B and S. The dual auxiliary outlets suit 5 to 15 mm², 10 to 6 B and S wire, so accessory leads land on the terminal instead of being piled on the post bolt.

If the old terminal was badly corroded, cut the cable back to clean copper before fitting the new one. Tighten firmly but do not crush the post; a lead post deforms easily. Related parts are in the <a href="https://frankiesautoelectrics.com.au/collections/projecta">Projecta range</a>.

Specifications

• Post: positive
• Style: heavy duty saddle with dual auxiliary
• Pack: bag of 10
• Main cable: 50 to 70 mm², 0 to 00 B and S
• Auxiliary cable: 5 to 15 mm², 10 to 6 B and S
• Material: forged brass

Warranty

This comes with the manufacturer's warranty through the Australian distributor. See the manufacturer's terms for details, plus our guarantees under the Australian Consumer Law.

FAQ

Just checking, are all 10 terminals in the BT620H-P10 positive?

All 10 are positive heavy duty saddle with dual auxiliary terminals, packed in one bag.

Quick question: how thick a cable can the positive BT620H-P10 take?

Projecta lists 50 to 70 mm², 0 to 00 B and S for the main cable.

Before I order, will a positive heavy duty saddle with dual auxiliary terminal fit the opposite post?

No. Positive posts are slightly larger than negative ones, so this positive terminal is sized for the positive post only.

Before I order, what makes the BT620H-P10 heavy duty compared with the standard saddle with dual auxiliary terminal?

It is built for heavier cable, 50 to 70 mm², 0 to 00 B and S, which suits 4WD, truck and dual battery work.

Quick question: replacing a corroded clamp with the positive heavy duty saddle with dual auxiliary BT620H-P10: anything to watch?

Cut the cable back to clean, bright copper if the old end is green or black, then fit the new terminal and tighten it firmly.