Projecta BT59H-10 Heavy Duty Crimp End Entry Brass Battery Terminal, Bag of 10

Quick answer

The Projecta BT59H-10 is the Heavy Duty Crimp End Entry Brass Battery Terminal, Bag of 10. Heavy duty pattern, so it suits thicker starter and dual battery cable.

Bag of 10 universal heavy duty crimp end entry terminals, so this one is aimed at workshops restocking the drawer rather than a single car. Heavy duty pattern, so it suits thicker starter and dual battery cable. Forged brass conducts well and copes with the heat and vibration of an engine bay.

Projecta lists the post fitment as universal. Clean the post back to bright metal before fitting, and coat the joint once tightened.

Size the cable first: this one is listed for 50 to 70 mm², 0 to 00 B and S. Cable goes into the end of the barrel and is crimped, giving a straight, tidy run off the post.

Tighten firmly but do not crush the post; a lead post deforms easily. After fitting, a thin smear of terminal grease or spray protector slows corrosion. If the old terminal was badly corroded, cut the cable back to clean copper before fitting the new one. Measure the post and the cable before ordering; a terminal that is too big for the post will never clamp properly. The full <a href="https://frankiesautoelectrics.com.au/collections/projecta">Projecta range</a> has the matching accessories.

Specifications

• Post: universal
• Style: heavy duty crimp end entry
• Pack: bag of 10
• Main cable: 50 to 70 mm², 0 to 00 B and S
• Material: forged brass

Warranty

This comes with the manufacturer's warranty through the Australian distributor. See the manufacturer's terms for details, plus our guarantees under the Australian Consumer Law.

FAQ

When should I pick the heavy duty BT59H-10 over the standard version?

It is built for heavier cable, 50 to 70 mm², 0 to 00 B and S, which suits 4WD, truck and dual battery work.

My old heavy duty crimp end entry terminal is cracked; can I just swap in the BT59H-10?

Cut the cable back to clean, bright copper if the old end is green or black, then fit the new terminal and tighten it firmly.

How do I stop the heavy duty crimp end entry BT59H-10 going green on the post?

Once it is tight, a thin coat of terminal grease or protector spray over the joint slows corrosion.

Is the heavy duty crimp end entry BT59H-10 suitable for a boat or caravan battery?

It suits any battery with the matching post, and cable in the 50 to 70 mm², 0 to 00 B and S range. Check the post type and cable size before ordering.

Who usually orders the BT59H-10 in a bag of 10?

The bag of 10 suits workshops and fleets that fit these terminals regularly. For a single repair, a single pack is easier.