Projecta BT32-10 Crimp End Entry Brass Battery Terminal, Box of 10

Quick answer

The Projecta BT32-10 is the Crimp End Entry Brass Battery Terminal, Box of 10. Buying for the workshop? The BT32-10 puts 10 universal crimp end entry terminals in one box.

Buying for the workshop? The BT32-10 puts 10 universal crimp end entry terminals in one box. Size the cable first: this one is listed for 15 to 50 mm², 6 to 0 B and S. Cable goes into the end of the barrel and is crimped, giving a straight, tidy run off the post.

Forged brass conducts well and copes with the heat and vibration of an engine bay. Projecta lists the post fitment as universal.

Before fitting, clean any corrosion off the post so the terminal seats properly.

Check the terminal again after the first week, as new cable can settle under the clamp. If the old terminal was badly corroded, cut the cable back to clean copper before fitting the new one. Measure the post and the cable before ordering; a terminal that is too big for the post will never clamp properly. Tighten firmly but do not crush the post; a lead post deforms easily. Keep the positive covered so a spanner cannot bridge it to the body. The full <a href="https://frankiesautoelectrics.com.au/collections/projecta">Projecta range</a> has the matching accessories.

Specifications

• Post: universal
• Style: crimp end entry
• Pack: box of 10
• Main cable: 15 to 50 mm², 6 to 0 B and S
• Material: forged brass

Warranty

This comes with the manufacturer's warranty through the Australian distributor. See the manufacturer's terms for details, plus our guarantees under the Australian Consumer Law.

FAQ

Does the BT32-10 box contain 10 of the same universal terminal?

All 10 are universal crimp end entry terminals, packed in one box.

Will 15 to 50 mm² cable fit the BT32-10?

Projecta lists 15 to 50 mm², 6 to 0 B and S for the main cable.

Is the BT32-10 solid brass or plated steel?

Projecta lists it as forged brass, which conducts well and copes with engine bay heat and vibration.

Can I use the BT32-10 on a 4WD dual battery setup?

It suits any battery with the matching post, and cable in the 15 to 50 mm², 6 to 0 B and S range. Check the post type and cable size before ordering.

Is the 10 piece BT32-10 aimed at workshops?

The box of 10 suits workshops and fleets that fit these terminals regularly. For a single repair, a single pack is easier.