Projecta BT14-P1 Positive Wingnut Brass Battery Terminal, Blister of 1

Quick answer

The Projecta BT14-P1 is the Positive Wingnut Brass Battery Terminal, Blister of 1. Need to replace just one clamp? The BT14-P1 is a single positive wingnut terminal.

Need to replace just one clamp? The BT14-P1 is a single positive wingnut terminal. Lugs sit on a 5/16 inch or 8 mm stud. With a wingnut on the stud, lugs can be swapped without a spanner.

Material is forged brass, a solid choice for battery connections. Positive posts are slightly larger than negative posts, so fit this one only to the positive side.

Before fitting, clean any corrosion off the post so the terminal seats properly.

Keep the positive covered so a spanner cannot bridge it to the body. After fitting, a thin smear of terminal grease or spray protector slows corrosion. Check the terminal again after the first week, as new cable can settle under the clamp. If the old terminal was badly corroded, cut the cable back to clean copper before fitting the new one. Tighten firmly but do not crush the post; a lead post deforms easily. Measure the post and the cable before ordering; a terminal that is too big for the post will never clamp properly. The full <a href="https://frankiesautoelectrics.com.au/collections/projecta">Projecta range</a> has the matching accessories.

Specifications

• Post: positive
• Style: wingnut
• Pack: a single terminal
• Stud: 5/16 inch or 8 mm
• Material: forged brass

Warranty

This comes with the manufacturer's warranty through the Australian distributor. See the manufacturer's terms for details, plus our guarantees under the Australian Consumer Law.

FAQ

Do I get a single terminal or a set with the BT14-P1?

One positive wingnut terminal, packed on its own.

Will my 8 mm ring lugs fit the BT14-P1 stud?

The stud is 5/16 inch or 8 mm. Use lugs with a hole to match.

Will a positive wingnut terminal fit the opposite post?

No. Positive posts are slightly larger than negative ones, so this positive terminal is sized for the positive post only.

Will the forged brass BT14-P1 handle engine bay heat?

Projecta lists it as forged brass, which conducts well and copes with engine bay heat and vibration.

Is the wingnut BT14-P1 suitable for a boat or caravan battery?

It suits any battery with the matching positive post. Check the post type and cable size before ordering.