Projecta BT11H-1 Heavy Duty Saddle Brass Battery Terminal, Blister of 1

Quick answer

The Projecta BT11H-1 is the Heavy Duty Saddle Brass Battery Terminal, Blister of 1. Need to replace just one clamp? The BT11H-1 is a single universal heavy duty saddle terminal.

Need to replace just one clamp? The BT11H-1 is a single universal heavy duty saddle terminal. It is the heavy duty version, built for the bigger cable sizes used on 4WD, truck and dual battery work.

Forged brass conducts well and copes with the heat and vibration of an engine bay. Listed as universal, so it is not tied to the positive or negative side. Give the post a clean first; a dirty post will undo a good terminal.

It takes 50 to 95 mm², 0 to 000 B and S main cable. A saddle clamp grips the stripped cable directly, no lug needed.

After fitting, a thin smear of terminal grease or spray protector slows corrosion. Measure the post and the cable before ordering; a terminal that is too big for the post will never clamp properly. If the old terminal was badly corroded, cut the cable back to clean copper before fitting the new one. Check the terminal again after the first week, as new cable can settle under the clamp. See the rest of the <a href="https://frankiesautoelectrics.com.au/collections/projecta">Projecta range</a> for matching parts.

Specifications

• Post: universal
• Style: heavy duty saddle
• Pack: a single terminal
• Main cable: 50 to 95 mm², 0 to 000 B and S
• Material: forged brass

Warranty

This comes with the manufacturer's warranty through the Australian distributor. See the manufacturer's terms for details, plus our guarantees under the Australian Consumer Law.

FAQ

Do I get a single terminal or a set with the BT11H-1?

One universal heavy duty saddle terminal, packed on its own.

What main cable range is the BT11H-1 rated for?

Projecta lists 50 to 95 mm², 0 to 000 B and S for the main cable.

What makes the BT11H-1 heavy duty compared with the standard saddle terminal?

It is built for heavier cable, 50 to 95 mm², 0 to 000 B and S, which suits 4WD, truck and dual battery work.

Can I overtighten a heavy duty saddle terminal like the BT11H-1?

Tighten until it cannot be twisted on the post by hand. Going further risks damaging the post or the terminal.

What metal is the universal heavy duty saddle BT11H-1 made of?

Projecta lists it as forged brass, which conducts well and copes with engine bay heat and vibration.