Projecta BHD14 Battery Hold Down Clamp, 14 cm, 200 mm Bolts

Quick answer

The Projecta BHD14 is the Battery Hold Down Clamp, 14 cm, 200 mm Bolts. A 14 cm battery hold down clamp with 200 mm bolts, the shorter of the Projecta clamps.

Measure the battery height plus the tray thickness to check the bolt length suits.

Clamp firmly but do not crack the case.

For taller batteries see the BHD18M at 225 mm or BHD18 at 250 mm.

Measure the battery you plan to use, including terminals, before ordering. Check the tray bolts at each service, as engine bay vibration loosens hardware over time. Route cables away from hot exhaust parts and sharp edges, and use grommets through panels. Fit the battery with a proper hold down, and check it again after the first rough trip. A loose or dirty connection can look like a flat battery or a failing alternator. Keep the battery top clean and dry; grime can let current track across between the posts. Disconnect the negative terminal first and reconnect it last whenever you work near the battery. If you are unsure about any of it, an auto electrician can fit and test the setup for you. The full <a href="https://frankiesautoelectrics.com.au/collections/projecta">Projecta range</a> has the matching accessories.

Specifications

• Clamp length: 14 cm
• Bolt length: 200 mm

Warranty

This comes with the manufacturer's warranty through the Australian distributor. See the manufacturer's terms for details, plus our guarantees under the Australian Consumer Law.

FAQ

How long are the BHD14 bolts?

200 mm. Check your battery height and tray before ordering.

What length is the BHD14 clamp bar?

14 cm.

Which hold down suits a taller battery than the BHD14?

The BHD18M has 225 mm bolts and the BHD18 has 250 mm bolts, both 18 cm clamps.