Mongoose SRS-02 Rubber Sleeves 15 Degree for Wireless Parking Sensor Metal Bumper Installation

Mongoose SRS-02 Rubber Sleeves 15 Degree for Wireless Parking Sensor Metal Bumper Installation

A pack of four 15 degree angled rubber sleeves designed for installing Mongoose wireless parking sensors into sloped metal bumpers or angled panels, correcting the sensor detection angle for accurate obstacle detection on non-flat mounting surfaces.

Product Overview

The Mongoose SRS-02 is a pack of four 15 degree angled rubber sleeves designed for installing Mongoose wireless parking sensors into metal bumpers or installation panels that sit on a slope or angle. When a bumper bar or mounting panel is not perfectly vertical, installing sensors with a 0 degree sleeve results in the sensor beam pointing upward or downward rather than straight ahead, reducing detection accuracy and reliability. The SRS-02 corrects this by offsetting the sensor angle by 15 degrees, compensating for the slope of the mounting surface and maintaining accurate straight-ahead detection performance.

Each SRS-02 kit includes four rubber sleeves, matching the four sensor configuration of all compatible Mongoose wireless parking sensor kits. The sleeves are black in colour and protect the sensor body from direct metal contact during installation. Compatible with the full Mongoose wireless parking sensor range including the MPRSWB-D, MPRSWB-S, MPFSWB-D, and MPFSWB-S. A 28mm hole saw (SDS-02) is available separately for cutting the correct mounting holes in metal bumpers. The drill is not included.

Features & Benefits

15 Degree Angle for Sloped Panel Installations: The 15 degree offset corrects the sensor detection angle on sloped or angled bumper bars and mounting panels, ensuring the ultrasonic sensor beam remains properly directed for accurate front or rear obstacle detection regardless of the surface angle.

Metal Bumper Installation Solution: The SRS-02 rubber sleeves protect the sensor body from direct metal contact, prevent signal interference, and ensure reliable ultrasonic detection performance when installing sensors into metal bumper bars or angled steel surfaces.

Pack of 4 Sleeves per Kit: Each SRS-02 kit includes four rubber sleeves, matching the four sensor configuration of all compatible Mongoose wireless parking sensor kits so a single SRS-02 purchase covers a complete sensor set installation.

Black Colour Finish: Finished in black to complement the Mongoose matt black sensors and blend with typical bull bar, steel tray, and metal bumper finishes for a clean and professional installation appearance.

Compatible Across Mongoose Wireless Sensor Range: Suits all Mongoose wireless front and rear parking sensor kits including the MPRSWB-D, MPRSWB-S, MPFSWB-D, and MPFSWB-S, making it the correct accessory for any sloped metal bumper or angled panel installation across the Mongoose wireless range.

Technical Specs

Compatible With / Goes Well With

Compatible Products:

Goes Well With:

• Mongoose SDS-02 28mm hole saw for metal bumper drilling (sold separately)
• Mongoose SRS-01 0 degree rubber sleeves (for flat vertical metal bumpers)
• Mongoose SBT-01 sensor and ECU undermount bracket kit

Frequently Asked Questions

What is the difference between the SRS-01 and SRS-02 rubber sleeves?

Both the SRS-01 and SRS-02 are rubber sleeves for installing Mongoose wireless sensors into metal bumpers. The key difference is the angle. The SRS-01 is set at 0 degrees for standard straight installation on flat, vertical metal bumper surfaces. The SRS-02 is set at 15 degrees and is designed for sloped or angled bumper bars and mounting panels, correcting the sensor beam direction to maintain accurate detection on non-flat surfaces. Choose the SRS-01 for flat vertical bumpers and the SRS-02 for sloped or angled surfaces.

Why do I need angled rubber sleeves for a sloped bumper?

If a bumper bar or mounting panel sits at an angle rather than perfectly vertical, a 0 degree sleeve will cause the sensor beam to point upward or downward instead of straight ahead, reducing detection range and accuracy. The 15 degree angle of the SRS-02 offsets this slope, redirecting the sensor beam back to a horizontal detection plane for reliable and accurate obstacle detection.

How many sleeves are included in one SRS-02 kit?

Each SRS-02 kit includes four rubber sleeves, which matches the four sensor configuration of all compatible Mongoose wireless parking sensor kits. One SRS-02 kit is sufficient for a complete front or rear sensor set installation.

Do I need a special drill bit to install the SRS-02 sleeves into a metal bumper?

Yes. A 28mm hole saw is required to cut the correct size mounting holes in a metal bumper for the SRS-02 rubber sleeves. The Mongoose SDS-02 28mm hole saw is available separately and is specifically suited to this application. The drill itself is not included and must be sourced separately.

Can I mix SRS-01 and SRS-02 sleeves in the same installation?

In most cases it is best to use the same angle sleeve across all four sensors for consistent detection performance. However, if your bumper has a combination of flat and angled mounting positions, mixing sleeves may be appropriate. Contact us or consult a professional installer to determine the best sleeve configuration for your specific bumper setup.