Mercedes E-Class W213 (Facelift with MBUX) Burmester Front Speaker & Sub DSP Amplified Package | MATCH UP PnP view 1
Mercedes E-Class W213 (Facelift with MBUX) Burmester Front Speaker & Sub DSP Amplified Package | MATCH UP PnP view 1
Mercedes E-Class W213 (Facelift with MBUX) Burmester Front Speaker & Sub DSP Amplified Package | MATCH UP PnP view 2
Mercedes E-Class W213 (Facelift with MBUX) Burmester Front Speaker & Sub DSP Amplified Package | MATCH UP PnP view 2
MATCH UP C42MB-FRT supplied as a component of this audio upgrade package
MATCH UP C42MB-FRT supplied as a component of this audio upgrade package
Click to open expanded view

Mercedes E Class W213 (Facelift with MBUX) Burmester Front Speaker & Sub DSP Amplified Package | MATCH UP PnP

Price
$4,095
Inc. GST. Most orders ship Australia wide for a flat $15.95. Larger or heavier items may cost more.
Buy now, pay later
  • image
  • image
  • image

Not on our shelf right now. We order this one in from our supplier.
Shipping information

Australia wide flat rate shipping is $15.95. Larger or heavier items may cost more; we will confirm when your order is processed. In stock items are dispatched within 1 to 2 business days. Report transit damage within 24 hours with photos so we can lodge a freight claim.

Share this product

Share Post Pin E-mail
Mercedes E-Class W213 (Facelift with MBUX) Burmester Front Speaker & Sub DSP Amplified Package | MATCH UP PnP view 1

Mercedes E Class W213 (Facelift with MBUX) Burmester Front Speaker & Sub DSP Amplified Package | MATCH UP PnP

$4,095

Product features

Factory speakers can leave voices difficult to follow and bass short of weight. This Soundtech package brings together the listed components for Mercedes E Class W213 Burmester. Choose by the chassis and installed sound system, not the badge alone.

What this upgrade addresses

  • A defined component list, so speakers, wiring and mounting parts can be planned together.
  • Replacement speakers for the positions described in the package, without treating a similar looking driver as interchangeable.
  • DSP adjustment for level, crossover and time alignment where supported by the listed processor. Professional setup is needed to suit the car.

Component specifications

MATCH UP C42MB-FRT

Specification Value
Power handling RMS 60 Watts
Maximum power handling 120 Watts
Frequency response 90 Hz to 25,000 Hz
Impedance 4 Ω
Efficiency 1 W / 1 m 89 dB
Cone material TW: Coated silk dome W: Coated paper
Crossover Separate, 6 dB slope with 3 stage tweeter level adjustment
Outer diameter TW: 43.1 mm / 1.70" W: 126 mm / 4.96"
Installation diameter TW: 39 mm / 1.54" W: 90.8 mm / 3.57"
Installation depth TW: 23.7 mm / 0.93" W: 34.3 mm / 1.35"

MATCH UP S4MB-CTR

Specification Value
Power handling RMS 60 Watts
Maximum power handling 120 Watts
Frequency response 90 Hz to 20,000 Hz
Impedance 2 x 4 Ω
Efficiency 1 W / 1 m 89 dB
Cone material Coated paper
Outer diameter
Installation diameter 99 mm / 3.90"
Installation depth 35 mm / 1.34"

MATCH UP W8MB-S4 RHD

Specification Value
Power handling RMS 100 Watts
Maximum power handling 200 Watts
Impedance Z | 1 x 4 Ω
DC resistance Re | 3,6 Ω
Frequency response 25 to 250 Hz
Resonance frequency Fs | 51 Hz
Mechanical Q factor Qms | 7.24
Electrical Q factor Qes | 0.71
Total Q factor Qts | 0.64
Compliance Cms | 276 µm/N
Equivalent air volume Vas | 18 L
Force factor B*I | 7.6 Tm
Efficiency 1 W / 1 m SPL | 88 dB
Cone area Sd | 216 cm²
Moving mass Mms | 35 g
Cone material Paper cone
Mechanical resistance Rms | 1.6 kg/s
Voice coil diameter ø | 37 mm
Voice coil winding height 16 mm
Max. linear excursion Xmax | +/- 5 mm

MATCH UP 10DSP MK2

Specification Value
Power RMS ≤ 1% THD+N
@ 4 Ohms Channels A to H: 65 Watts (min. 3 Ohms*) Channels I to J: 75 Watts (min. 3 Ohms*)
@ 2 Ohms Channels I to J: 125 Watts
@ 1 Ohm
bridged @ 4 Ohms
bridged @ 2 Ohms
Max. output power per channel** Channels A to H: up to 80 Watts RMS @ 4 Ohms Channels I to J: up to 90 Watts RMS @ 4 Ohms Channels I to J: up to 160 Watts RMS @ 2 Ohms
Amplifier technology Class GD
Inputs 8 x Highlevel speaker input 1 x Optical SPDIF (12 to 96 kHz) 1 x Extension Card 2.0
Input sensitivity Channels A to F: 4 to 16 Volts Channels G to H: 4 to 32 Volts
Input impedance RCA / Cinch
Input impedance highlevel 9 to 33 Ohms with ADEP.3
Outputs 10 x Speaker output 1 x RCA / Cinch 1 x Remote Out
Output voltage RCA / Cinch 3 Volts RMS
Frequency response 15 Hz to 22,000 Hz
DSP resolution 64 Bit
DSP power 295 MHz (1.2 billion MAC operations/second)
Sampling rate 48 kHz
DSP type Audio signal processor
Signal converters A/D: BurrBrown D/A: BurrBrown
Signal to noise ratio digital input 105 dB (A weighted)
Signal to noise ratio analog input 103 dB (A weighted)
Distortion (THD @ 1 kHz, 1 W into 4 Ohms) < 0.015 %
Distortion (THD+N @ 1 kHz, 1 W into 4 Ohms) < 0.02 %
Distortion (THD @ 100 Hz, 1 W into 4 Ohms)
Distortion (THD+N @ 100 Hz, 1 W into 4 Ohms)
Operating voltage 10.5 to 18 Volts (max. 5 sec. down to 6 Volts)
Power rating DC 12 V ⎓ 60 A max.
Idle current 500 mA
Max. remote output current 500 mA
Operating temperature range −40° C to +70° C
Fuse 2 x 25 A LP-Mini fuse (APS)
Additional features Class GD technology with dynamically controlled power supply, 32 Bit CoProcessor, ADEP.3 circuit, Start Stop capability, Smart Control Port, USB-C, Auto Remote switch
Dimensions (H x W x D) 46 x 145 x 163 mm / 1.81 x 5.71 x 6.42"

* DC resistance min. 3.0 Ohms ** In typical multi channel applications

Extension Card 2.0 ANALOG IN

Specification Value
Input voltage highlevel 1.5 to 30 Volts (adjustable)
Input voltage lowlevel 0.5 to 8 Volts (adjustable)
Lowlevel input 3.5 mm jack
Additional features ADEP.3, Auto Remote function

MATCH PP-MB 1.9MBUX-BUR

Specification Value
Cable length 1.00 meter
Connections 1 x 20 pole MOLEX plug for the connection of the System Connector input of the UP 10DSP 1 x 8 pole MOLEX plug for the connection of the highlevel inputs E to H of the UP 10DSP 1 x 12 pole MOLEX plug for the connection of speaker outputs E to J of the UP 10DSP 1 x 4 pole MOLEX plug for the connection of the MEC ANALOG IN module 1 x 38 pole Mercedes system jack 1 x 38 pole Mercedes system plug

Cable length

1.00 meter

Connections

1 x 20 pole MOLEX plug for the connection of the System Connector input of the UP 10DSP

1 x 8 pole MOLEX plug for the connection of the highlevel inputs E to H of the UP 10DSP

1 x 12 pole MOLEX plug for the connection of speaker outputs E to J of the UP 10DSP

1 x 4 pole MOLEX plug for the connection of the MEC ANALOG IN module

1 x 38 pole Mercedes system jack

1 x 38 pole Mercedes system plug

Fitment and exclusions

Specification Value
Vehicle Mercedes E Class
Chassis and body W213 sedan
Build range 2021 model year onwards, facelift W213 chassis only
Required factory sound system MBUX Burmester with the factory amplifier and matching 38 pole Mercedes connections
Steering configuration Right hand drive only
Amplifier integration Factory amplifier retained, new amplifier integrated via T harness.

For the stated Burmester system only. Not for the Basic Sound system.

The chassis and body listed above only. Other body styles and later chassis generations are not included in this application.

What is in the box

Package quantity Item and selected model
1 MATCH UP C42MB-FRT
1 MATCH UP S4MB-CTR
1 MATCH UP W8MB-S4 RHD
1 MATCH UP 10DSP MK2
1 Extension Card 2.0 ANALOG IN
1 MATCH PP-MB 1.9MBUX-BUR

For facelift vehicles with MBUX only. Earlier COMAND equipped vehicles are excluded.

Installation and setup

Professional installation is recommended. Check the vehicle build, factory amplifier, connectors and mounting positions before work starts. Minor modifications may be needed depending on the exact year and trim. Installation and tuning are not included in the package price. Where a DSP amplifier is listed, set the crossovers, levels and routing for the actual speakers and test music, calls, navigation prompts and warning sounds.

Warranty

Australian Consumer Law rights apply. Confirm the warranty for the selected components when arranging the installation.

Frequently asked questions

Which components are included?

MATCH UP C42MB-FRT (quantity 1), MATCH UP S4MB-CTR (quantity 1), MATCH UP W8MB-S4 RHD (quantity 1). The package table lists the remaining selected items and quantities.

Which vehicle and factory system is this for?

Mercedes E Class W213 sedan, 2021 model year onwards, facelift W213 chassis only. Required factory system: MBUX Burmester with the factory amplifier and matching 38 pole Mercedes connections. Other chassis, bodies and factory systems are not included.

How does the amplifier connect?

Soundtech specifies retaining the factory amplifier and adding the listed amplifier through a T harness. Match the factory sound system and the selected harness before installation.

Does this package need DSP tuning?

Yes. The supplied MATCH UP 10DSP MK2 needs channel routing, crossovers and levels set for the selected speakers and the vehicle. Arrange professional setup.

Are installation and tuning included?

No. The price covers the listed products. Installation and any DSP tuning are arranged separately. Minor modifications may be needed depending on the exact year and trim.

What should be checked before replacing the speakers?

Check the stated impedance, installation depth, cutout and connectors for MATCH UP C42MB-FRT. Use the selected adapters where listed. A nominal speaker diameter or a similar grille is not enough to establish fitment.