Summer Sale!
Not on our shelf right now. We order this one in from our supplier.
Australia wide flat rate shipping is $15.95. Larger or heavier items may cost more; we will confirm when your order is processed. In stock items are dispatched within 1 to 2 business days. Report transit damage within 24 hours with photos so we can lodge a freight claim.
Before adding a subwoofer, match the available space, enclosure and amplifier load. MATCH UP W8BMW-S is the driver described below. Check the voice coil configuration and mounting measurements before choosing the enclosure or amplifier.
| Power RMS / max. | P | 200 / 400 Watts | |
| Impedance | Z | 1 x 2 Ω | |
| DC resistance | Re | 2.0 Ω | |
| Resonance frequency | Fs | 49 Hz | |
| Mechanical Q factor | Qms | 3.80 | |
| Electrical Q factor | Qes | 0.61 | |
| Total Q factor | Qts | 0.53 | |
| Compliance | Cms | 210 µm/N | |
| Equivalent air volume | Vas | 13.9 L | |
| Force factor | B*I | 7.1 Tm | |
| Efficiency 1 W / 1 m | SPL | 90 dB | |
| Cone area | Sd | 214 cm² | |
| Moving mass | Mms | 47.4 g | |
| Cone material | Extremely stiff fibreglass cone | ||
| Mechanical resistance | Rms | 3.97 kg/s | |
| Voice coil diameter | ø | 42.5 mm | |
| Voice coil winding height | 12.5 mm | ||
| Max. linear excursion | Xmax | ± 4.0 mm | |
| Outer diameter | ø | 239 mm / 9.41" | |
| Installation diameter | ø | 175 mm / 6.89" | |
| Installation depth | 40 mm / 1.57" | ||
| Recommended enclosure volumes | |||
| Sealed box | |||
| Net volume | 3 L | ||
| Lower limiting frequency (minus 3dB) | 63 Hz | ||
| DSP settings | Highpass: Butterworth; 12 dB/octave; crossover frequency 40 Hz Additional EQ filter: centre frequency 90 Hz; Q factor 3.0; gain minus 4 dB Lowpass: Butterworth; 24 dB/octave; crossover frequency 80 to 100 Hz | ||
| Vented box | For one subwoofer | For two subwoofers | |
| Net volume | 12 L | 24 L | |
| Port diameter | ø | 60 mm / 2.36" | 80 mm / 3.15 |
| Port area | 28 cm² | 50 cm² | |
| Port length | 25 cm / 9.84" | 20 cm / 3.94" | |
| Port tuning frequency | Fb | 46 Hz | 46 Hz |
| Lower limiting frequency (minus 3dB) | 45 Hz | 45 Hz | |
| DSP settings | Highpass: Self Define; crossover frequency 40 Hz; Q factor 1.3 Additional EQ filter: centre frequency 67 Hz; Q factor 3.0; gain minus 3 dB Lowpass: Butterworth; 24 dB/octave; crossover frequency 80 to 100 Hz |
The manufacturer application guide dated November 2020 lists the following BMW mounting applications for this model. These are selected closed year ranges from that guide, not a complete list and not a guarantee for every Australian factory audio option.
| Series | Chassis | Body | Guide model years |
|---|---|---|---|
| 1 Series | E81 | 3 door | 2007 to 2012 |
| 1 Series | E82 | Coupe | 2007 to 2013 |
| 1 Series | E87 | 5 door | 2007 to 2011 |
| 3 Series | E90 | Sedan | 2005 to 2011 |
| 3 Series | E91 | Touring | 2005 to 2011 |
| 3 Series | E92 | Coupe | 2005 to 2011 |
| 3 Series | E93 | Convertible | 2005 to 2011 |
The same guide pairs the single 2 ohm UP W8BMW-S with UP 7BMW for the stated HiFi option 676 system before mid 2019, or UP 7DSP routes for the stated Stereo and RAM systems. The RAM route requires the specified MEC ANALOG IN and harness. This does not establish compatibility with every Harman Kardon system or newer RAM generation.
Confirm the Australian build, original under seat enclosure, factory audio option, amplifier and connectors before ordering. The guide is dated and does not verify later facelifts or an unspecified MINI model.
Manufacturer application guide, November 2020
Listed by the manufacturer:
Have a qualified car audio installer check the mounting, wiring and system setup before fitting. Frankies workshops at Albion Park Rail (02) 4257 2636 and South Nowra (02) 4423 5254 can quote on installation.
Your purchase is covered by the Australian Consumer Law. Contact Frankies for the warranty terms that apply to this model.
Check the application above with us before ordering. We need the model, series, build date, factory audio system and installation position. A vehicle badge on its own is not enough to confirm the right version.
The guide links the single 2 ohm model to the stated UP 7BMW and UP 7DSP routes. Factory HiFi, Stereo and RAM systems require different amplifier and harness combinations. Confirm the actual vehicle and factory audio option.
Impedance Z 1 x 2 Ω. Match the final load and voice coil wiring to a suitable amplifier.
Power RMS / max. P 200 / 400 Watts. RMS and maximum ratings are different. Check the conditions in the specification table.
Installation depth 40 mm / 1.57". Check the available depth and clearance in your installation before ordering.
The manufacturer lists 2 x Subwoofer MATCH UP W8BMW-S, 2 x BMW connection cable, 1 x Mounting material, 1 x Instruction manual.
Your purchase is covered by the Australian Consumer Law. Contact Frankies for the warranty terms for this model.
Servicing the Illawarra and surrounding areas for over 30 years, Frankies Auto Electrics is a multi-award winning service provider and retail outlet, covering all aspects of auto electrical work and in-car entertainment. From sales and installations, electrical diagnostics and fault finding, upgrades and additions, our team of qualified sales people, technicians and installers are on hand to help.
Albion Park Rail
69 Princes Highway, Albion Park Rail, NSW Australia 2527
South Nowra
4/142 Princes Highway, South Nowra, NSW Australia 2541
!