LED Autolamps LR12/2 12V 50W load resistors in blister pack of 2
LED Autolamps LR12/2 12V 50W load resistors in blister pack of 2
LED Autolamps LR122 LR12/2 12V 50W Load Resistor, Pack of 2
LED Autolamps LR122 LR12/2 12V 50W Load Resistor, Pack of 2
LR122 product information and specifications
LR122 product information and specifications
Click to open expanded view
LED AUTOLAMPS logo

LED Autolamps LR12/2 12V 50W Load Resistor, Pack of 2

SKU: LR122
Price
$42
Inc. GST. Most orders ship Australia wide for a flat $15.95. Larger or heavier items may cost more.
Buy now, pay later
  • image
  • image
  • image

Shipping information

Australia wide flat rate shipping is $15.95. Larger or heavier items may cost more; we will confirm when your order is processed. In stock items are dispatched within 1 to 2 business days. Report transit damage within 24 hours with photos so we can lodge a freight claim.

Share this product

Share Post Pin E-mail
LED Autolamps LR12/2 12V 50W load resistors in blister pack of 2

LED Autolamps LR12/2 12V 50W Load Resistor, Pack of 2

$42

Product features

The LED Autolamps LR12/2 is a pack of two 12V, 50W load resistors that each draw the same current as a 21W globe, stopping hyper flash and bulb out errors after fitting LED lamps.

Swap the indicators on a trailer or ute to LED and they often flash at double speed or throw a warning, because the circuit sees a tiny load and decides a globe has blown. A load resistor puts the missing load back.

Wiring it in

Fit one resistor per function on each side as needed, wired between the input wires of the lamp. Do not earth it to the chassis, because a poor earth there can upset the lighting circuit.

Mount it to metal

The resistor can reach 170°C. Screw the aluminium base to a metal surface, using the 45mm mounting centres, well clear of plastic, hoses and wiring.

Specifications

Voltage 12V only
Dummy load 50W
Globe equivalent 21W
Base Aluminium
Mounting centres 45mm
Rating IP67
Pack 2
Weight 0.1kg

Warranty

This comes with the manufacturer's warranty through the Australian distributor. See the manufacturer's terms for details, plus our guarantees under the Australian Consumer Law.

Frequently asked questions

Can I use these on a 24V truck?

No. They are 12V only.

Why do they need to be on metal?

They get very hot, up to 170°C, and the metal draws the heat away.

How do I wire the load resistors?

Wire one resistor across the input wires of each light function on each side, not to the chassis, and bolt the aluminium base to metal at 45mm centres. Mount them clear of anything that can melt, because they run hot.

Is the LR12/2 waterproof?

It is rated IP67, which means dust tight and protected against temporary immersion in water.

What size is the LR12/2?

Mounting centres: 45mm, as listed by LED Autolamps.