LED Autolamps 284ARWM-2 MultiVolt Stop/Tail/Indicator/Reverse LHS RHS Light

Quick answer

The LED Autolamps 284ARWM-2 is a twin pack of rear combination lamps, one left and one right, covering stop, tail, indicator, reverse and reflector.

Each 284 mm lamp runs a sequential indicator and a diffused tail, and the multivolt circuit handles 12V or 24V trailers from 10 to 30V.

Problems it solves

• Old globe lamps on a trailer or caravan that fill with water. These are IP67 sealed LED units.
• A separate reflector bolted beside each light. The reflector is built into the lens.
• Mixed 12V and 24V towing. The 10 to 30V range covers both.

Specifications

• Functions: stop, tail, indicator, reverse, reflector
• Indicator: sequential
• Tail: diffused
• Voltage: 10 to 30V multivolt
• Size: 284 x 100 x 37 mm
• Cable: 28 cm
• Lens and base: polycarbonate
• Rating: IP67
• Draw at 13.8V: stop 0.18A, tail 0.14A, indicator 0.30A, reverse 0.14A
• Approvals: ECE R7, R6, R23 and R3 numbers on the maker data sheet
• Pack: twin blister, LHS and RHS

Fitment and compatibility

The 284 by 100 mm body suits flat trailer and caravan rear panels. Allow 116 mm between the mounting bolts and a 10 mm hole for the cable.

What is in the box

One left hand and one right hand 284ARWM lamp in a twin blister pack.

Install notes

Surface mount using the bolts in the back of each lamp, then run the lead through a 10 mm hole. LED Autolamps refers installers to ADR 13/00 for lamp position rules.

Warranty

LED Autolamps gives the 284 Series a 5 year warranty. This comes with the manufacturer's warranty through the Australian distributor. See the manufacturer's terms for details, plus our guarantees under the Australian Consumer Law.

Frequently asked questions

Will the 284ARWM-2 suit a 24V truck trailer?

Yes. Its rated input covers 10 to 30V. The 284 by 100 mm body suits flat trailer and caravan rear panels.

How do I mount the 284ARWM-2 lamps?

Bolt through from the back and pass the lead through a 10 mm hole. Surface mount using the bolts in the back of each lamp, then run the lead through a 10 mm hole.

Is the 284ARWM-2 sold as a pair?

Yes. The pack has a left and a right lamp.

Does the 284ARWM-2 need a separate reflector?

No. A reflex reflector is built in.

Also worth a look: Combination LED Lights and LED Tail Lights.

Is the 284ARWM-2 waterproof?

It is rated IP67, which means dust tight and protected against temporary immersion in water.