LED Autolamps 235ASEQ-2 12V Sequential Indicator Strip Light 10 Amber Blister

LED Autolamps 235ASEQ-2 12V Sequential Amber Indicator Strip Lamp 10 Square LEDs 237mm x 25mm x 3mm Recessed Mount ECE Approved CTA060125 IP67 Twin Pack

The LED Autolamps 235ASEQ-2 is a 12V sequential amber indicator strip lamp with 10 square LEDs in a 237mm x 25mm x 3mm low profile recessed housing. ECE approved (CTA060125), IP67 waterproof. Surface mount brackets available separately. Sold as a twin pack. Five year warranty.

Product overview

The 235ASEQ-2 delivers a sequential LED sweep effect across the 10 square LED array, stepping from one end of the strip to the other during indicator activation for a distinctive, high visibility output. Suited to trailers, caravans, trucks, and commercial vehicles requiring a stylish and attention grabbing amber indicator. The 3mm ultra slim depth allows flush recessed installation with minimal protrusion. ECE approval CTA060125 confirms road legal use in Australia. Surface mount brackets available separately. 12V only. IP67 rated. Twin pack provides two lamps for a complete left and right installation.

Features and benefits

Sequential LED sweep effect: LEDs activate in a sweeping pattern during indicator operation for a distinctive, high visibility amber output.

10 square LEDs across a 237mm strip: Square LED array delivering a bold indicator presence.

237mm x 25mm x 3mm ultra slim housing: 3mm depth for flush recessed panel installation.

Recessed fitting: Clean, integrated installation on trailer and vehicle rear panels.

Surface mount brackets available separately: For applications where recessed mounting is not suitable.

ECE approved (CTA060125): Meets international road approval standards accepted for on road use in Australia.

IP67 fully waterproof and submersible: Suited to trailer, caravan, and off road environments.

12V only.

Twin pack: Two lamps per pack for a complete left and right installation.

Five year warranty.

Technical specs

Warranty

LED Autolamps warranty: 5 years. Faulty installation, overvoltage and accidental damage are not covered. Your rights under Australian Consumer Law also apply.

Frequently asked questions

Is the 235ASEQ-2 ECE approved?

Yes. The 235ASEQ-2 holds ECE approval CTA060125, meeting international road approval standards accepted for on road use in Australia as an indicator lamp.

What is a sequential indicator?

A sequential indicator activates its LEDs in a sweeping pattern from one end of the strip to the other rather than all illuminating at once. This produces a distinctive, high visibility effect that draws attention more effectively than a standard static flash.

How does the 235ASEQ-2 differ from the 235A12?

The 235ASEQ-2 uses a sequential LED sweep pattern and is ECE approved (CTA060125). The 235A12 is a standard static indicator lamp with ADR approval (CTA060128). Both share the same 237mm x 25mm x 3mm dimensions and 10 square LED format. The 235ASEQ-2 is 12V only; the 235A12 is also 12V only.

Can the 235ASEQ-2 be surface mounted?

The 235ASEQ-2 is designed for recessed fitting. Surface mount brackets are available separately for installations where recessed mounting is not practical. Contact us to confirm the correct bracket.

How many lamps are in the pack?

The 235ASEQ-2 is sold as a twin pack containing two lamps for a complete left and right installation.