LED Autolamps 100BARRM 12/24V Stop/Tail/Indicator Assembly Light LED

Three-Function ADR-Approved Tail Light Assembly Built for Trucks, Trailers, and Heavy Vehicles Pre-Wired and Ready to Fit.

Product Overview

The LED Autolamps 100BARRM is a 3-in-1 combination stop, tail, and indicator LED lamp assembly designed for trucks, semi-trailers, caravans, and heavy vehicles. At 350mm long and just 31mm deep, it combines three compliance-critical rear lighting functions into a single pre-wired, surface-mount unit reducing installation time and simplifying the wiring of new trailer builds and replacement lamp fitments.

Carrying full ADR road approval (CTA060221) with specific compliance codes for stop/tail (CRN33402) and indicator (CRN33156), the 100BARRM meets Australian road regulations out of the box. Rated to IP67 and backed by a 5-year warranty, it is built to handle the wash-downs, corrugations, and demanding operating conditions of Australian transport and touring environments. The individual lens replacement feature adds long-term serviceability when a lens is damaged, it can be replaced independently rather than replacing the entire assembly.

Key Specifications

• Light functions: Stop / Tail / Indicator (3-in-1)
• Voltage: 12V / 24V (dual voltage)
• IP rating: IP67 — fully dust-tight; immersion-resistant to 1m depth for 30 minutes
• Compliance: ADR Road Approved — CTA060221
• Compliance codes: Stop/Tail — CRN33402 / Indicator — CRN33156
• Mount type: Surface mount
• Mount centre to centre: 290mm
• Connector: Pre-wired
• Housing colour: Black
• Individual lens replacements: Yes
• Dimensions: 350mm (L) × 120mm (W) × 31mm (D)
• Current draw: Stop 0.38A / Tail 0.04A / Indicator 0.38A @ 13.8V
• Weight: 0.72 kg
• Warranty: 5 years

Features & Benefits

• 3-in-1 Combination Function — Stop, tail, and indicator in a single lamp assembly. One unit replaces three separate lamps, cutting installation complexity, reducing cable runs, and streamlining ADR compliance checks on trucks, trailers, and caravans.
• Pre-Wired Connector — Supplied with a pre-wired connector for fast, direct installation without requiring custom wiring or termination work on site — a practical advantage for fleet fitouts and time-pressured workshop installs.
• Individual Lens Replacements Available — If a lens is cracked or damaged, it can be replaced independently without swapping the entire lamp assembly. This lowers the long-term maintenance cost on fleet vehicles and working trailers where lens damage is an occupational reality.
• ADR Road Approved — CTA060221 — Full ADR compliance for all three functions confirmed by approval number CTA060221. Stop/tail certified to CRN33402, indicator certified to CRN33156 — specific codes are on-page for compliance documentation purposes.
• IP67 Waterproof Rating — Completely sealed against dust and capable of withstanding water immersion to 1 metre for 30 minutes. Built for pressure wash-downs, creek crossings, and heavy rain in Australian transport and touring environments.
• 12V / 24V Dual Voltage — Works natively across both light vehicle and heavy transport electrical systems without modification — a single SKU covering passenger vehicles, caravans, and 24V heavy trucks.
• Low-Draw LED Efficiency — Tail function draws just 0.04A at 13.8V, significantly reducing electrical load compared to traditional incandescent equivalents — a meaningful advantage on multi-lamp trailer installations and dual battery touring setups.
• Surface Mount with 290mm Centre-to-Centre Spacing — Standard surface mount configuration with a confirmed 290mm mounting centre distance for straightforward replacement fitment on existing trailer and truck body mounting positions.
• 5-Year Warranty — Backed by a 5-year manufacturer's warranty, above average for the combination lamp category and a strong confidence statement for fleet operators and owner-builders alike.

Technical Specs

Compatible With / Goes Well With

Suitable vehicle and trailer types:

• Trucks and semi-trailers (12V and 24V systems)
• B-doubles and road trains
• Caravans and camper trailers
• Box trailers and flatbed trailers
• Horse floats and stock trailers
• Buses and coaches
• Heavy haulage and plant transport vehicles
• Custom trailer builds requiring ADR-compliant combination rear lighting

Pairs well with:

• LED Autolamps reverse lamps (separate unit required — this assembly does not include reverse function)
• LED Autolamps 100BARRM individual replacement lens kits
• LED Autolamps side marker and clearance lights for a matched full-vehicle LED upgrade
• LED Autolamps number plate lights and wiring harness accessories

Weight

0.72 kg per unit. Confirmed by supplier.

Frequently Asked Questions

Does the 100BARRM include a reverse light function?

No. The 100BARRM provides stop, tail, and indicator functions only. A separate reverse lamp must be fitted if reverse lighting is required. Refer to the LED Autolamps range for a suitable matching reverse or combination unit.

What ADR approval does the 100BARRM carry?

The 100BARRM holds ADR approval CTA060221. Stop and tail functions are certified to CRN33402 and the indicator function is certified to CRN33156 — confirming full road-legal compliance for all three functions on Australian public roads.

What does "individual lens replacements" mean in practice?

If a lens is cracked or damaged in service, the individual lens can be replaced separately without replacing the entire lamp assembly — reducing repair costs and downtime on working vehicles and fleet trailers.

Is the 100BARRM suitable for both 12V and 24V vehicles?

Yes. The 100BARRM operates across 12V and 24V without modification, making it suitable for both light recreational vehicles and heavy commercial transport in a single SKU.

What is the current draw of the 100BARRM across its three functions?

At 13.8V, the stop and indicator functions each draw 0.38A, while the tail function draws just 0.04A — well below the current demand of equivalent incandescent lamps and suitable for multi-lamp installations on dual battery touring setups.