JL Audio FIX-82 OEM Integration DSP with Automatic Time Correction and Digital EQ

Factory systems are tuned for cost, not for where you sit. The FIX-82 is a digital signal processor that lets an installer correct timing and tone for your car.

It is an OEM integration DSP with automatic time correction and digital EQ, with 8 channel inputs, 2 channel stereo RCA outputs and 1 digital optical output. The FiX 82 automatically corrects time delayed factory outputs before signal summing and EQ correction. A 24 bit DSP and dual 1/3 octave equalisers combine complex 2 way, 3 way and 4 way factory outputs and level match them into a flat, full range stereo signal.

Key features

• Differential balanced inputs accept factory analogue audio signals, from low voltage line level to high power amplified speaker level outputs (up to 30V RMS)
• Calibration is started with a single button press and takes about 30 seconds, with no special equipment needed
• Connecting a PC running TüN Software via USB gives access to diagnostic panels that show the frequency response of the inputs and the corrected outputs
• Adjustments can be made to input polarity, muting and filtering, and new calibrations can be started from the PC
• Output options include dual RCA jacks (4V RMS) or a digital optical (Toslink) output, supporting PCM audio (S/PDIF) at 24 bit/48 kHz

Specifications

• Part number: FIX-82
• Inputs: 8 channel
• Outputs: 2 channel stereo RCA, plus 1 digital optical output

Installation

We recommend fitting by a qualified car audio installer. Our workshops at Albion Park Rail (02) 4257 2636 and South Nowra (02) 4423 5254 can quote on fitting.

Warranty

It comes with the manufacturer's warranty through the Australian distributor, plus your rights under the Australian Consumer Law.

Questions and answers

Can you fit the FIX-82 for me?

Yes. Our Albion Park Rail and South Nowra workshops can quote on supply and fitting. Call (02) 4257 2636 or (02) 4423 5254.

What warranty comes with the FIX-82?

It comes with the manufacturer's warranty through the Australian distributor, plus your rights under the Australian Consumer Law.

Do I need a computer to set up the FIX-82?

Calibration is started with a single button press and takes about 30 seconds, with no special equipment needed. Connecting a PC running TüN Software via USB also lets an installer view diagnostic panels and make further adjustments.

What outputs does the FIX-82 have?

Output options include dual RCA jacks (4V RMS) or a digital optical (Toslink) output, supporting PCM audio (S/PDIF) at 24 bit/48 kHz.

Can you work with a factory head unit?

Yes. That is what this unit is for. It accepts factory analogue audio signals from low voltage line level up to high power speaker level outputs, up to 30V RMS, and sums them into a full range stereo signal for an aftermarket amplifier.