IROAD IM-300 | OBD-II Power Cable | For Electric/Non-Electric/Hybrid Vehicles

Plug-N'-Play Solution For Parking Mode!

IROAD OBD-II Power Cable (IM-300)
The IROAD OBD-II Power Cable is tailored for Electric, Non-Electric, and Hybrid Vehicles. Easily plug it into the OBD terminal to activate parking recording with IROAD dash cams, offering a convenient, plug-and-play solution for parking mode.

With its built-in low-voltage cut-off at 11.2V, the IROAD OBD-II cable integrates with your dash cam’s voltage cut-off, usually set at a higher threshold. Parking mode is initiated shortly after turning off the vehicle, and in some models, the vehicle needs to be stationary for 5 minutes.

• Status LED
  
• Recording Mode Switch (S: Driving Mode Only / P: Driving & Parking Mode)
  
• Overcurrent shutdown (Minimum 3.4A)
  
• Stop & Go Technology Support
  
• Compatibility with Petrol, Hybrid and Electric Vehicles
  
• Compatible with 12volt and 24volt Vehicles
  

IROAD OBD Power Cable 2nd Generation IM-300
IM-300 offers an easier Plug & Play power option for installing a dash camera. By connecting directly to the vehicle’s OBDII port it reduces the risk of damaging the vehicle’s wiring. It also provides better protection for the vehicle with its overcurrent cut-off circuit design.

Features:

• Plug, Play & Forget
  The IM-300 OBDII Power Cable is a Plug, Play & Forget alternative to the traditional dash cam hardwiring cable. With a straightforward, quick setup, anyone can install a dash cam using the IM-300 without needing professional installation services.

   

• One Cable For All Vehicles
  The IM-300 OBDII Power Cable is a Plug, Play & Forget alternative to the traditional dash cam hardwiring cable. With a straightforward, quick setup, anyone can install a dash cam using the IM-300 without needing professional installation services.
  
  
  • EV: EVs | F: Fuel & Hybrid
    *The IM-300 is also compatible with 24V vehicles (Trucks or commercial vehicles).
    
    
• Parking Mode Enabled
  Just like the traditional hardwiring fuse cable, the OBDII power cable also enables 24/7 Parking Mode recording. Through a Recording Mode switch on the cable’s plug connector, users can choose to turn ON/OFF the parking mode recording capability:
  
  
  • S: Driving Mode Only | P: Driving & Parking Mode

Product Highlights:

• LED
  Verify Operation With LED
• Set Recording Mode
  Switching S/P
• Overcurrent Cut-Off
  Designed a circuit to protect against overcurrent.
• Built-In G-Sensor
  G Sensor and voltage-driven scenario.
• Stop & Go Supporting
  Operating ON STOP & GO VEHICLES
• Electric
  The ACC function works on all vehicles (Especially Parking Mode)

Specifications:

• Model: IM-300
• Input Voltage: DC 12V ~24V
• Output Voltage: DC 12V ~24V / Max 2A
• Length: 2M
• Operating Temperature: -40°C ~ 85°C
• Overcurrent Cut-Off: Min 3.4A