Gator G158VC Chrome Tailgate Handle Reverse Camera for Isuzu D Max

Adding a reverse camera to a D Max without drilling the tailgate is easiest with a handle that has the camera built in. The Gator G158VC replaces the factory handle with a chrome one that houses a 150 degree camera.

It suits D Max models without a factory locking tailgate: all 2012 to 2015 models and the SX grade from 2016 to 2020.

Problems it solves

• Drilling holes in the tailgate. The camera sits in the replacement handle, so no extra holes are needed.
• Guidelines on screen you do not want. Cut the green loop to remove them.
• Image back to front on your screen. Cut the white loop to mirror the picture.

G158VC specifications

• Finish: chrome
• Lens angle: 150 degrees
• Video: PAL or NTSC switchable, RCA
• Minimum illumination: 0.2 lux
• Protection: IP68
• Supply: 12V
• Operating temperature: minus 20 to 70 degrees C
• Extension cable: 8m

Fitment and compatibility

Isuzu D Max 2012 to 2015, all badges, and 2016 to 2020 SX grade only. Not for LS, LS U, LS M, X Runner or other grades with a factory locking tailgate. For a black handle, see the G158V.

What is in the box

• Camera in tailgate handle housing
• 8m extension cable
• Instructions

Install notes

Run the 8m cable through the tailgate and along the chassis to a head unit or monitor with an RCA camera input.

Decide on guidelines and mirror image before final fitting, as the loops are cut, not switched.

Warranty

This comes with the manufacturer's warranty through the Australian distributor. See the manufacturer's terms for details, plus our guarantees under the Australian Consumer Law.

G158VC FAQs

Does the G158VC suit a D Max with a locking tailgate?

No. It is only for models without a factory locking tailgate.

Which 2016 to 2020 D Max grades does it fit?

SX only.

Is the extension cable included?

Yes, an 8m extension cable and instructions.

What screen can it plug into?

Any head unit or monitor with an RCA camera input, PAL or NTSC.