ESB Audio ESB9.6W 6.5" (165 mm) High End Midwoofer

Weak midbass is why many systems sound flat even with a good subwoofer. The ESB9.6W is a midbass driver built to fill in that punch.

Generously sized neodymium magnet: This very powerful magnet is made from a high temperature resistant neodymium and allows the size and bulk of the magnetic motor to be greatly reduced The cast aluminium and powder coated basket offers very low resistance to the passage of air, and its shape (verified by FEM analysis) reduces vibration and resonance. The NBL rubber surround has a shape designed to ensure very smooth movement at very low excursion, becoming increasingly controlled as the excursion increases and approaches the limit

Key features

• Pole yoke with special internal ventilation, ensures a long life of the voice coil
• The terminals accept large gauge cables and are gold plated to prevent any loss of power generated by the amp
• A special spider device, screwed to the central pole, ensures the spider damper clamping
• CNC-machined aluminium grille (optional)
• Technical Specifications

Specifications

• Nominal Impedance: 4 Ohm
• Nominal Power Handling: 180 Watt
• Transient Power: 360 Watt
• Frequency Response: 48 Hz ~ 5 KHz
• Sensitivity: 91.5 dB 2.83v/1m
• Part number: ESB9.6W

Installation

We recommend fitting by a qualified car audio installer. Our workshops at Albion Park Rail (02) 4257 2636 and South Nowra (02) 4423 5254 can quote on fitting.

Warranty

It comes with the manufacturer's warranty through the Australian distributor, plus your rights under the Australian Consumer Law.

Questions and answers

Will the ESB9.6W fit my car?

It depends on the size and depth of your factory speaker location. Send us your make, model and year and we will check fitment and any adaptors needed.

How much power does the ESB9.6W handle?

The supplier lists Nominal Power Handling: 180 Watt.

What impedance is the ESB9.6W?

The supplier lists Nominal Impedance: 4 Ohm. Match it to your amplifier's stable load.

How efficient is the ESB9.6W?

The supplier lists Sensitivity: 91.5 dB 2.83v/1m. Higher sensitivity means more volume from the same power.

Do I need an amplifier for the ESB9.6W?

Aftermarket speakers and subwoofers perform best with an amplifier that matches their power rating. A factory head unit alone usually cannot drive them properly. Ask us to match one.

Can you fit the ESB9.6W for me?

Yes. Our Albion Park Rail and South Nowra workshops can quote on supply and fitting. Call (02) 4257 2636 or (02) 4423 5254.

What warranty comes with the ESB9.6W?

It comes with the manufacturer's warranty through the Australian distributor, plus your rights under the Australian Consumer Law.