BRAX midrange speaker front and rear views showing its cone and basket
BRAX midrange speaker front and rear views showing its cone and basket
BRAX rear view of the midrange magnet label and connection terminals
BRAX rear view of the midrange magnet label and connection terminals
BRAX front view of the midrange cone
BRAX front view of the midrange cone
BRAX angled front view of the midrange driver basket
BRAX angled front view of the midrange driver basket
BRAX close view of the midrange cone surface
BRAX close view of the midrange cone surface
Click to open expanded view

BRAX MATRIX ML80 PRO, 100W RMS Midrange Speaker Pair, 4Ω

SKU: MATRIXML80PRO
Price
$1,995
Inc. GST. Most orders ship Australia wide for a flat $15.95. Larger or heavier items may cost more.
Buy now, pay later
  • image
  • image
  • image

Not on our shelf right now. We order this one in from our supplier.
Shipping information

Australia wide flat rate shipping is $15.95. Larger or heavier items may cost more; we will confirm when your order is processed. In stock items are dispatched within 1 to 2 business days. Report transit damage within 24 hours with photos so we can lodge a freight claim.

Share this product

Share Post Pin E-mail
BRAX midrange speaker front and rear views showing its cone and basket

BRAX MATRIX ML80 PRO, 100W RMS Midrange Speaker Pair, 4Ω

$1,995

Product features

Before replacing a factory speaker, check its mounting space, impedance and connection. BRAX MATRIX ML80 PRO is the BRAX speaker option described below. Its specifications help you match the driver to the amplifier and installation, rather than buying on diameter alone.

What it does

  • Ultra lightweight carbon fleece multilayer cone combines superior stiffness to weight ratio with reduced resonance for precise, natural and highly dynamic sound reproduction
  • Aerodynamically shaped aluminium die cast basket allows ideal voice coil ventilation while minimizing airflow noise for consistently high performance even at demanding levels
  • Ultra precise machined push pull neodymium magnet system ensures excellent magnetic linearity for minimal distortion, clean dynamics and maximum control at high output levels
  • Vented spider enhances airflow between spider and magnet system for consistent performance even at high sound pressure levels
  • Optional stainless steel support ring with grille (MR3) adds a refined aesthetic and provides a secure, elegant mounting solution

Specifications

  • Brand: BRAX
  • Distributor product code: MATRIX ML80 PRO
  • Product: BRAX MATRIX ML80 PRO, 100W RMS Midrange Speaker Pair, 4Ω
Power handling RMS / max. P 100 / 150 Watts (highpass > 300 Hz at 24 dB/Oct.)
Impedance Z 4 Ω
DC resistance Re 3.4 Ω
Frequency response 250 Hz to 6,000 Hz
Resonance frequency Fs 114 Hz
Mechanical Q factor Qms 1.71
Electrical Q factor Qes 0.46
Total Q factor Qts 0.36
Compliance Cms 640 μm/N
Equivalent air volume Vas 1.15 L
Force factor B*I 4.0 Tm
Sensitivity SPL 91 dB @ 2.83V / 1m 88 dB @ 1W / 1m
Cone area Sd 35 cm²
Moving mass Mms 3.0g
Cone material Carbon fleece multilayer cone
Mechanical resistance Rms 1.26 kg/s
Voice coil diameter ø 25 mm / 0.75"
Voice coil winding height 6 mm / 0.24"
Max. linear excursion Xlin ± 1.5 mm
Max. mechanical excursion Xmax ± 4.0 mm
Outer diameter ø 92 mm / 3.6"
Installation diameter ø 76 mm / 3.0"
Installation depth 34 mm / 1.4"
Recommended installation options
a. Infinite baffle
Recommended highpass filter 300 Hz / 24 dB/Octave “Linkwitz Riley”
b. Sealed box
Net volumes Recommended DSP / amplifier highpass filter
0.4 liter (System resonance: 200 Hz) 350 Hz / 24 dB/Octave “Linkwitz Riley”
0.8 liter (System resonance: 155 Hz) 300 Hz / 24 dB/Octave “Linkwitz Riley”
1.2 liter (System resonance: 140 Hz) 250 Hz / 24 dB/Octave “Linkwitz Riley”
  • Note: The enclosure should always be filled with appropriate damping material.

Fitment and compatibility

Match the mounting measurements, impedance and amplifier requirements before installation. Speaker diameter alone does not confirm vehicle fitment.

In the box

Listed by the manufacturer:

  • 2 x High End Midrange Speaker BRAX MATRIX ML80 PRO
  • 1 x Allen key
  • 1 x Certificate
  • 1 x Data sheet

Installation

Have a qualified car audio installer check the mounting, wiring and system setup before fitting. Frankies workshops at Albion Park Rail (02) 4257 2636 and South Nowra (02) 4423 5254 can quote on installation.

Warranty

Your purchase is covered by the Australian Consumer Law. Contact Frankies for the warranty terms that apply to this model.

Questions and answers

What am I buying?

BRAX MATRIX ML80 PRO, 100W RMS Midrange Speaker Pair, 4Ω. Check the specifications and selected option above for the version supplied.

What impedance does it use?

Impedance Z 4 Ω. Match the final load and voice coil wiring to a suitable amplifier.

What power rating should I use?

Power handling RMS / max. P 100 / 150 Watts (highpass > 300 Hz at 24 dB/Oct.). RMS and maximum ratings are different. Check the conditions in the specification table.

What mounting space do I need?

Installation depth 34 mm / 1.4". Check the available depth and clearance in your installation before ordering.

What is supplied?

The manufacturer lists 2 x High End Midrange Speaker BRAX MATRIX ML80 PRO, 1 x Allen key, 1 x Certificate, 1 x Data sheet.

What warranty applies?

Your purchase is covered by the Australian Consumer Law. Contact Frankies for the warranty terms for this model.