BRAX angled side view of the midbass driver
BRAX angled side view of the midbass driver
BRAX front view of the midbass cone
BRAX front view of the midbass cone
BRAX rear view of the midbass magnet label
BRAX rear view of the midbass magnet label
Click to open expanded view

BRAX GRAPHIC GL6 MK2, 6.5" 100W RMS Midbass Woofer Pair, 3Ω

SKU: GRAPHICGL6MK2
Price
$1,450
Inc. GST. Most orders ship Australia wide for a flat $15.95. Larger or heavier items may cost more.
Buy now, pay later
  • image
  • image
  • image

Not on our shelf right now. We order this one in from our supplier.
Shipping information

Australia wide flat rate shipping is $15.95. Larger or heavier items may cost more; we will confirm when your order is processed. In stock items are dispatched within 1 to 2 business days. Report transit damage within 24 hours with photos so we can lodge a freight claim.

Share this product

Share Post Pin E-mail
BRAX angled side view of the midbass driver

BRAX GRAPHIC GL6 MK2, 6.5" 100W RMS Midbass Woofer Pair, 3Ω

$1,450

Product features

Before replacing a factory speaker, check its mounting space, impedance and connection. BRAX GRAPHIC GL6 MK2 is the BRAX speaker option described below. Its specifications help you match the driver to the amplifier and installation, rather than buying on diameter alone.

What it does

  • Very stiff lightweight paper cone with unique “MicroSphere” coating consisting of micro ceramic hollow spheres embedded in a polymer layer offers best possible impulse response without any sound colouration
  • Special shaped rubber surround for long linear cone excursion
  • Polyurethane dustcap for optimisation of the frequency response in the upper midrange area
  • Extremely rigid aluminium diecast basket
  • 24 carat gold plated screw terminals for lowest contact resistance
  • Powerful and precisely machined magnet system for high efficiency in combination with excellent magnetic flux linearity
  • Large pole piece ventilation hole significantly reduces compression effects

Specifications

  • Brand: BRAX
  • Distributor product code: GRAPHIC GL6 MK2
  • Product: BRAX GRAPHIC GL6 MK2, 6.5" 100W RMS Midbass Woofer Pair, 3Ω
Power handling RMS / max. P 100 / 150 Watts
Impedance Z 3 Ω
DC resistance Re 3.0 Ω
Frequency response 40 Hz to 4,000 Hz
Resonance frequency Fs 52 Hz
Mechanical Q factor Qms 6.00
Electrical Q factor Qes 0.57
Total Q factor Qts 0.52
Compliance Cms 603 μm/N
Equivalent air volume Vas 16.3 L
Force factor B*I 5.2 Tm
Sensitivity SPL 92 dB @ 2.83V / 1m 88 dB @ 1W / 1m
Cone area Sd 139 cm²
Moving mass Mms 15.3 g
Cone material Paper cone with “MicroSphere” coating consisting of micro ceramic hollow spheres embedded in a polymer layer
Mechanical resistance Rms 0.84 kg/s
Voice coil diameter ø 37 mm
Voice coil winding height 14 mm
Max. linear excursion Xmax ± 4.0 mm
Outer diameter ø 166 mm / 6.5"
Installation diameter ø 142 mm / 5.6"
Installation depth 68.2 mm / 2.7"
Recommended enclosure volumes
Sealed box
Net volume 8 L
Lower limiting frequency (minus 3dB) 69 Hz
Vented box
Net volume 15 L
Port diameter ø 60 mm / 2.4"
Port area 28 cm²
Port length 19 cm / 7.5"
Port tuning frequency Fb 45 Hz
Lower limiting frequency (minus 3dB) 48 Hz

Fitment and compatibility

Match the mounting measurements, impedance and amplifier requirements before installation. Speaker diameter alone does not confirm vehicle fitment.

In the box

Listed by the manufacturer:

  • 2 x High End Woofer BRAX GRAPHIC GL6 MK2
  • 1 x Data sheet

Installation

Have a qualified car audio installer check the mounting, wiring and system setup before fitting. Frankies workshops at Albion Park Rail (02) 4257 2636 and South Nowra (02) 4423 5254 can quote on installation.

Warranty

Your purchase is covered by the Australian Consumer Law. Contact Frankies for the warranty terms that apply to this model.

Questions and answers

What am I buying?

BRAX GRAPHIC GL6 MK2, 6.5" 100W RMS Midbass Woofer Pair, 3Ω. Check the specifications and selected option above for the version supplied.

What impedance does it use?

Impedance Z 3 Ω. Match the final load and voice coil wiring to a suitable amplifier.

What power rating should I use?

Power handling RMS / max. P 100 / 150 Watts. RMS and maximum ratings are different. Check the conditions in the specification table.

What mounting space do I need?

Installation depth 68.2 mm / 2.7". Check the available depth and clearance in your installation before ordering.

What is supplied?

The manufacturer lists 2 x High End Woofer BRAX GRAPHIC GL6 MK2, 1 x Data sheet.

What warranty applies?

Your purchase is covered by the Australian Consumer Law. Contact Frankies for the warranty terms for this model.