BRAX midrange speaker with its protective grille fitted
BRAX midrange speaker with its protective grille fitted
BRAX midrange speaker with the cone exposed
BRAX midrange speaker with the cone exposed
BRAX front view of the midrange cone
BRAX front view of the midrange cone
BRAX rear view of the midrange magnet label
BRAX rear view of the midrange magnet label
Click to open expanded view

BRAX GRAPHIC GL2, 2" 80W RMS Midrange Speaker Pair, 4Ω

SKU: GRAPHICGL2
Price
$1,250
Inc. GST. Most orders ship Australia wide for a flat $15.95. Larger or heavier items may cost more.
Buy now, pay later
  • image
  • image
  • image

Not on our shelf right now. We order this one in from our supplier.
Shipping information

Australia wide flat rate shipping is $15.95. Larger or heavier items may cost more; we will confirm when your order is processed. In stock items are dispatched within 1 to 2 business days. Report transit damage within 24 hours with photos so we can lodge a freight claim.

Share this product

Share Post Pin E-mail
BRAX midrange speaker with its protective grille fitted

BRAX GRAPHIC GL2, 2" 80W RMS Midrange Speaker Pair, 4Ω

$1,250

Product features

Before replacing a factory speaker, check its mounting space, impedance and connection. BRAX GRAPHIC GL2 is the BRAX speaker option described below. Its specifications help you match the driver to the amplifier and installation, rather than buying on diameter alone.

What it does

  • Particularly clear and dynamic sound characteristics thanks to the rigid and lightweight aluminium cone
  • Precisely machined ­neodymium magnet system for highest ­magnetic flux linearity
  • 24 carat gold plated terminals for maximum conductivity
  • Magnet system with threaded hole for hidden fastening from behind
  • Sturdy protection grille for protecting the cone from damages
  • Aerodynamically optimised basket
  • Extremely compact dimensions ideal for installation in the A pillar outer diameter almost identical to tweeter BRAX GRAPHIC GL1

Specifications

  • Brand: BRAX
  • Distributor product code: GRAPHIC GL2
  • Product: BRAX GRAPHIC GL2, 2" 80W RMS Midrange Speaker Pair, 4Ω
Power RMS / max. P 80 / 120 Watts (highpass > 400 Hz at 24 dB/Oct.)
Impedance Z 4 Ω
DC resistance Re 3.1 Ω
Frequency response 400 Hz to 20.000 Hz
Resonance frequency Fs 165 Hz
Mechanical Q factor Qms 8.90
Electrical Q factor Qes 0.55
Total Q factor Qts 0.52
Compliance Cms 720 μm/N
Equivalent air volume Vas 0.24 L
Force factor B*I 2.6 Tm
Efficiency 1 W / 1 m SPL 84 dB
Cone area Sd 15 cm²
Moving mass Mms 1.6 g
Cone material Aluminium cone
Mechanical resistance Rms 0.13 kg/s
Voice coil diameter ø 19 mm / 0.75"
Voice coil winding height 5 mm / 0.2"
Max. linear excursion Xmax ± 1.0 mm
Outer diameter ø 60 mm / 2.36"
Installation diameter ø 53 mm / 2.1"
Installation depth 26.8 mm / 1.1"
Recommended enclosure volumes
Sealed box with minimum 250 ml net volume
Net volumes Recommended DSP / amplifier settings
0.25 liter (System resonance: 200 Hz) Crossover frequency: 600 Hz Min. filter slope: 12 dB/Oct.
0.5 liter (System resonance: 155 Hz) Crossover frequency: 450 Hz Min. filter slope: 12 dB/Oct.
0.75 liter (System resonance: 140 Hz) Crossover frequency: 300 Hz Min. filter slope: 24 dB/Oct.
  • Note: The enclosure should always be filled with appropriate damping material.

Fitment and compatibility

Match the mounting measurements, impedance and amplifier requirements before installation. Speaker diameter alone does not confirm vehicle fitment.

In the box

Listed by the manufacturer:

  • 2 x High End Cone Midrange Speaker BRAX GRAPHIC GL2
  • 2 x Mounting clip
  • 1 x Allen key
  • 1 x Data sheet

Installation

Have a qualified car audio installer check the mounting, wiring and system setup before fitting. Frankies workshops at Albion Park Rail (02) 4257 2636 and South Nowra (02) 4423 5254 can quote on installation.

Warranty

Your purchase is covered by the Australian Consumer Law. Contact Frankies for the warranty terms that apply to this model.

Questions and answers

What am I buying?

BRAX GRAPHIC GL2, 2" 80W RMS Midrange Speaker Pair, 4Ω. Check the specifications and selected option above for the version supplied.

What impedance does it use?

Impedance Z 4 Ω. Match the final load and voice coil wiring to a suitable amplifier.

What power rating should I use?

Power RMS / max. P 80 / 120 Watts (highpass > 400 Hz at 24 dB/Oct.). RMS and maximum ratings are different. Check the conditions in the specification table.

What mounting space do I need?

Installation depth 26.8 mm / 1.1". Check the available depth and clearance in your installation before ordering.

What is supplied?

The manufacturer lists 2 x High End Cone Midrange Speaker BRAX GRAPHIC GL2, 2 x Mounting clip, 1 x Allen key, 1 x Data sheet.

What warranty applies?

Your purchase is covered by the Australian Consumer Law. Contact Frankies for the warranty terms for this model.