Autoleads SWI-TY08 Toyota 360 Camera, SWC and Amp Retention Interface, Prado and Kluger

Quick answer

The Autoleads SWI-TY08 is the Toyota 360 Camera, SWC and Amp Retention Interface, Prado and Kluger. SWI-TY08 is for swapping the radio in Toyotas that have the factory 360 degree camera.

It is plug and play, so no factory wires are cut, and it keeps the 360 camera, the reversing camera, the steering wheel audio and phone buttons and the factory amplified system. The supplier notes the factory amp takes a 2 channel input, so fade is not available. The interface also gives speed pulse, park brake and reverse outputs, and the supplier lists 24, 28, 6 and 10 pin connectors. Toyota made a lot of facelift changes, so check the plugs behind your radio before you buy. The supplier fitment table lists the Kluger 2018 to 2019 and the Prado 150 Series 2013 to 2020, all with the 360 degree camera. For matching parts, browse theAutoleads collectionat Frankies Auto Electrics.

Specifications

• Keeps the factory 360 degree camera and reversing camera
• Keeps steering wheel audio and phone buttons
• Keeps the factory amplified system, no fade
• Speed pulse, park brake and reverse outputs
• Plug and play on 24, 28, 6 and 10 pin connectors

Warranty

This comes with the manufacturer's warranty through the Australian distributor. See the manufacturer's terms for details, plus our guarantees under the Australian Consumer Law.

FAQ

Does SWI-TY08 suit a Prado without the 360 camera?

The supplier fitment table only lists Prado and Kluger models with the 360 degree camera system.

Does the SWI-TY08 keep front to rear fader control?

No. The supplier says the factory amplifier has a 2 channel input, so there is no fading.

Which plugs should I see behind my Toyota radio?

The supplier lists 24, 28, 6 and 10 pin connectors, and recommends checking them before buying because of facelift changes.

Is dual press steering wheel control supported?

No. The supplier lists dual press steering wheel control as not supported.