Audiotec Fischer aMI tuning kit with microphone, leads and accessories in an open carry case
Audiotec Fischer aMI tuning kit with microphone, leads and accessories in an open carry case
Audiotec Fischer aMI measurement interface mounted beside a measurement microphone
Audiotec Fischer aMI measurement interface mounted beside a measurement microphone
Audiotec Fischer aMI measurement interface viewed at an angle
Audiotec Fischer aMI measurement interface viewed at an angle
Audiotec Fischer aMI microphone and signal input connection panel
Audiotec Fischer aMI microphone and signal input connection panel
Audiotec Fischer aMI output and USB connection panel
Audiotec Fischer aMI output and USB connection panel
Click to open expanded view

Audiotec Fischer AMI TUNING KIT, Audio Measurement Interface Tuning Kit

SKU: AMITUNINGKIT
Price
$875.01
Inc. GST. Most orders ship Australia wide for a flat $15.95. Larger or heavier items may cost more.
Buy now, pay later
  • image
  • image
  • image

Not on our shelf right now. We order this one in from our supplier.
Shipping information

Australia wide flat rate shipping is $15.95. Larger or heavier items may cost more; we will confirm when your order is processed. In stock items are dispatched within 1 to 2 business days. Report transit damage within 24 hours with photos so we can lodge a freight claim.

Share this product

Share Post Pin E-mail
Audiotec Fischer aMI tuning kit with microphone, leads and accessories in an open carry case

Audiotec Fischer AMI TUNING KIT, Audio Measurement Interface Tuning Kit

$875.01

Product features

Guessing at factory EQ or speaker timing makes tuning harder. Audiotec Fischer AMI TUNING KIT is measurement equipment for electrical and acoustic analysis. Check the software and connection details below when planning your DSP tuning setup.

What it does

  • Stereo signal input with microphone and line input for all in one measurements
  • Microphone input supports all condenser microphones with adjustable gain and phantom power
  • Line input with adjustable sensitivity for low and high level signals (max. 1 V or 40 V RMS)
  • Stereo signal output with RCA and optical digital outputs for direct playback into DSP systems
  • Loopback functionality for advanced measurements, such as phase response analysis
  • USB powered operation, no external power supply required
  • Studio grade condenser microphone with free field calibration files for 0° and 90°
  • Optimised linear frequency response at 90° for precise in car measurements

Specifications

  • Brand: Audiotec Fischer
  • Distributor product code: AMI TUNING KIT
  • Product: Audiotec Fischer AMI TUNING KIT, Audio Measurement Interface Tuning Kit
AMI
Inputs 1 x Microphone input 1 x Line input
Microphone input specification
Frequency response 12 Hz to 44 kHz (±1 dB)
Dynamic range 95 dB (A weighted)
Input sensitivity 5 to 200 mV
Phantom power Yes (24 Volts)
Line input specification
Frequency response 8 Hz to 44 kHz (±1 dB)
Dynamic range 101 dB (A weighted)
Input sensitivity max. 1 V / max. 40 V
Input impedance 10 kOhms
Outputs 2 x Line output 1 x Optical output (SPDIF)
Line output specification
Frequency response 7 Hz to 44 kHz (±1 dB)
Dynamic range 100 dB (A weighted)
Maximum output voltage 900 mV (RMS)
Minimum load 5 kOhms
Loopback function Yes
General specification
Audio sampling rate 96 kHz / 32 Bit
USB power consumption max. 250 mA
Supported operating systems Windows, macOS, iOS and Android
Microphone
Transducer principle Condenser (back electret)
Operating principle Pressure receiver
Frequency response 20 to 20,000 Hz (50 to 16,000 Hz ± 1.5 dB), diffuse field equalized
Polar pattern Omnidirectional
Sensitivity (0 dB = 1 V/Pa) 15 mV/Pa (= minus 36.5 dBV) ± 1 dB
Nominal impedance 160 Ω
Nominal load impedance ≥ 2.2 kΩ
Maximum SPL (Sound Pressure Level) 122 dBSPL at f = 1 kHz, k = 1%, RL = 2.2 kΩ
Signal to noise ratio (related to 1 Pa) > 57 dB
A weighted equivalent noise level Approx. 26 dB(A)
Power supply 12 to 48 V phantom power
Current consumption Approx. 1.9 mA
Output Electronically balanced

Fitment and compatibility

DSP PC-Tool 6

DSP PC-Tool 5

DSP PC-Tool 4

Check the exact model and connection on the equipment you are using. A similar looking port or model name does not confirm compatibility.

In the box

Listed by the manufacturer:

  • 1 x AMI (Audio Measurement Interface)
  • 1 x Beyerdynamic MM1 Microphone
  • 1 x Microphone holder for tripod
  • 1 x RCA to Highlevel adaptor
  • 1 x 16 GB USB 3.0 flash drive with DSP tuning tracks
  • 1 x 3.0 m / 9.85’ USB-C to USB-C cable with USB-A adaptor
  • 1 x 3.5 m / 11.50’ optical toslink cable
  • 1 x 3.5 m / 11.50’ mono RCA cable
  • 1 x 2.0 m / 6.56’ XLR microphone cable

Installation

Have a qualified car audio installer check the mounting, wiring and system setup before fitting. Frankies workshops at Albion Park Rail (02) 4257 2636 and South Nowra (02) 4423 5254 can quote on installation.

Warranty

Your purchase is covered by the Australian Consumer Law. Contact Frankies for the warranty terms that apply to this model.

Questions and answers

What am I buying?

Audiotec Fischer AMI TUNING KIT, Audio Measurement Interface Tuning Kit. Check the specifications and selected option above for the version supplied.

What equipment is it compatible with?

DSP PC-Tool 6 DSP PC-Tool 5 DSP PC-Tool 4

What is supplied?

See the In the box section above for the sourced parts and quantities. Check the selected variant and any separately required accessories before ordering.

What should I check before installation?

Check the exact equipment model, the relevant dimensions and connections, and any extra parts listed above. Ask your installer to confirm the full system before fitting.

Can Frankies help me check the right version?

Yes. Contact us with the model you are ordering and the equipment or vehicle application so we can check the relevant details.

What warranty applies?

Your purchase is covered by the Australian Consumer Law. Contact Frankies for the warranty terms for this model.